I’m trying to build mender-connect version 2.3.0 on a Toradex Apalis iMX8 using the tdx-reference-multimedia-image (Yocto-based), and I’m running into an error during the do_install step: install: cannot stat ‘/…/mender-connect-2.3.0/support/mender-connect.service’: No such file or directory It se…

Hi @Rani13958 , Just by looking at the 2.3.x source branches, the file seems to be available: mender-connect/support at 2.3.x · mendersoftware/mender-connect · GitHub Can you gather a little more information, like which layer revisions are involved? Also, have you tried inspecting the actual source…

hi @TheYoctoJester to be clear i cloned the meta-mender and the meta-mender-community to my build env and this is the mender configuration in my local.conf : Enable Mender features MENDER_FEATURES_ENABLE:append = " mender-uboot mender-image mender-image-sd" MENDER_FEATURES_DISABLE:append = " mend…

Any news about this issue ? I’ve the exact same issue. I’ve cloned the scarthgap branch of GitHub - mendersoftware/meta-mender: Yocto Project meta layer for the Mender client Added the bblayer : BBLAYERS += “/opt/conga-STDA4/sources/meta-mender/meta-mender-core” But then mender-connect can not …

Hi @Damien , Far-fetched guess - have you checked in mender-systemd is in MENDER_FEATURES? Otherwise the service file will not be installed to the root filesystem, see meta-mender/meta-mender-core/recipes-mender/mender-connect/mender-connect.inc at 033fe1f44f6f89f105f4d371a08bab6b80c8806b · menderso…

hi @Damien The build issue with mender-connect version 2.3.0, where the mender-connect.service file was not found during the do_package step, has been resolved. The error stemmed from the Yocto/Bitbake build process failing to locate the systemd service file, despite its presence in the source dire…

@Rani13958 did you intentionally build without mender-systemd in MENDER_FEATURES? It should definitely be picked up otherwise.

The omission of mender-systemd from MENDER_FEATURES was unintentional, as it was not explicitly included in my local.conf configuration, which currently has: MENDER_FEATURES_ENABLE:append = " mender-uboot mender-image mender-image-sd" However, this did not cause any issues with the mender-connect …

Hi @Rani13958 , You’re totally right in your expectations, mender-systemd should automatically be enabled. To dig a bit further into this, can you try and run bitbake-getvar -r core-image-minimal MENDER_FEATURES and paste it, including the evaluation history? Thanks! Greetz, Josef

Mender-connect.service not found

General Discussions

Topic		Replies	Views
Didn't find service unit 'mender-connect.service' General Discussions yocto , mender-connect , scarthgap	2	87	February 26, 2025
Mender-connect issue Yocto Project	2	390	February 6, 2024
Disabling mender systemd service for standalone deployments General Discussions yocto , nxp	2	1032	June 25, 2021
Mender-client.service missing after mender-convert General Discussions	14	397	January 22, 2024
Didn't find service unit 'mender-client.service' General Discussions mender-client , dunfell , kirkstone	4	1355	April 10, 2023

Mender-connect.service not found

Related topics