Hello, I am wondering if there are any plans for meta-mender to officially support the Orin NX (specifically I’m targeting the p3509-a02-p3767-0000 machine). Or, alternatively, I am considering modifying the Mender setup myself to apply it to the Orin NX. I believe the Orin Nano NVMe project contr…

I second this. It is currently a struggle to get a new Jetson platform started with Mender, considering the documentation on the meta-mender-tegra-jetpack5 layer is deprecated . This documentation references an old version of tegrademo-distro that does not exist for Jetpack 5. Updated documentation f…

@gyuhwan-park , I tested the method in the linked thread with my Orin NX and got a successful flash and boot! That being said, I am using an Orin NX in a custom carrier board with a configuration most similar to the p3768-0000-p3767-0000 machine. Our setups are slightly different, but I am still hop…

Hi @gyuhwan-park and @graceagrace , Yes indeed, the Tegra family has been quite problematic since Jetpack 5. The main reason is that basically everything about how the Tegra family is booted, flashed, and so on is highly NVidia specific. Hence, glue logic has to be created and maintained. In the cas…

Hi @graceagrace , thank you for letting me know. I also applied it to p3509-a02-p3767-0000, confirming that flash, boot, and a basic mender install <URL> work. To share my experience here, I started with tegra-demo-distro and set all layers to kirkstone using git checkout or git clone -b. The additi…

Yay! Glad you were able to make it work! Steps for a machine based off of p3768-0000-p3767-0000 are nearly identical to yours - in my case, I also created a .bbappend for tegra-bootfiles with the following content: do_install:append() { if [ -f ${SH_CUSTOM_CONFIG_FRAGMENT} ]; then cat …

Hi @graceagrace , Yep, getting that into the kas files would be great and I’ll happily do that! I’ve just given the local.conf of @gyuhwan-park a short inspection, and it seems to add these assignments MENDER_EFI_LOADER = "" MENDER_DATA_PART_SIZE_MB = "100" MENDER_STORAGE_DEVICE_BASE="/dev/nvme0n1…

Hi @TheYoctoJester , Thank you very much for helping with this! To answer your questions: Yes, jetson-orin-nano.yml targets an Orin Nano with an SD card. jetson-orin-nano-nvme.yml should not be changed. I believe this is the configuration @paroque28 figured out in the linked thread to this topic. …

Hi @TheYoctoJester , Thank you for checking my experience. I targeted the p3509-a02-p3767-0000 and used the meta-tegra configuration file conf/machine/p3509-a02-p3767-0000.conf as it is. The file contains the following: TNSPEC_BOOTDEV ?= "nvme0n1p1" PARTITION_LAYOUT_TEMPLATE_DEFAULT ?= "flash_t234…

Hi @graceagrace and @gyuhwan-park , So, first shot! Does this look sensible for merging? meta-mender-community/kas/jetson-orin-nx-devkit.yml at orin_nx_experimental · TheYoctoJester/meta-mender-community · GitHub Can you eventually give it a spin and check the functionality? I’ve build tested it al…

Looks good to me on the surface! I don’t have the appropriate carrier board to confirm successful flashing, so I’ll defer to @gyuhwan-park , here.

Plans or Methods for Orin NX Support in Yocto?

Board Integrations

Topic		Replies	Views
Orin NX integration / Seeed reComputer General Discussions yocto , nvidia , orin	14	892	October 1, 2025
Jetson Orin NX & Jetpack 5 Integration Issues Yocto Project yocto , tegra , jetson , orin-nano	8	683	February 3, 2025
Jetson Orin NX and Jetpack 6 Mender & Intergration issues Yocto Project yocto , nvidia , jetson , scarthgap , jetpack-6	2	683	December 12, 2024
NVIDIA Tegra Jetson Xavier NX Yocto Project nvidia , dunfell	25	6891	May 4, 2022
Mender Integration for Jetson Orin Nano 4GB (P3767-0004) Yocto Project kirkstone	0	460	August 25, 2023

Plans or Methods for Orin NX Support in Yocto?

Related topics