(MENDER_STORAGE_DEVICE: not found) Mender u-boot patches for Toradex U-boot on Apalis imx8x

[ABTP]

@ABTP

I have two issues though, the first one I am familiar with, but the 2nd issue I don’t know what it means or why its happening.

When I run mender daemon, I get this error:

ERRO[0000] Failed to read the current active partition: No match between boot and root partitions.: Failed mender_saveenv_canary check. There is an error in the U-Boot setup. Likely causes are: 1) Mismatch between the U-Boot boot loader environment location and the location specified in /etc/fw_env.config. 2) ‘mender_setup’ is not run by the U-Boot boot script: exit status 1

To fix this, I need to update fw_env.config with the correct Device name , Device offset , and Env. size so that they match those U-Boot is using. How can I go about fixing this issue?

The 2nd issue is that after the board finishes booting, I get this message repeatedly:

mmcblk1: response CRC error sending SET_BLOCK_COUNT command, card status 0xc00b00

I provided more information about my setup and current stage in the following post:

https://hub.mender.io/t/toradex-integration-updates/3763/3?u=abtp