Rasberry pi 32-bit OS bullseye fails to boot (image via mender-convert)

[user706]

By the way, above in the config you can see

MENDER_CLIENT_VERSION=5.0.1

When I was using lastest and got client 5.0.3, I was running into this issue:

mender-update install file.mender resulted in

System update fails "Could not open path to sync"

Oh, thanks. So this really is like that, that starting from mender-update 5.0.2 only 64 bit OS is supported?? Because I’m on 32 bit raspberry pi, and running mender-update 5.0.3 and command mender-update install myupdate.mender results in record_id=1 severity=error time="2026-Jan-08 11:45:33.337012" name="Global" msg="No such file or directory: Could not open path to sync: \x08��\x01\x00\x00\x00\x00/mender/modules/v3/payloads/0000/tree/current_device_type" Streaming failed. System not modi…

Is it true that for raspberry pi OS bullseye 32-bits, I need MENDER_CLIENT_VERSION=5.0.1 and that higher versions are only for 64 bit???