Board description NVIDIA Jetson TX2 hardware with computer vision, GPU and multimedia support. [image] URL: https://www.nvidia.com/en-us/autonomous-machines/embedded-systems-dev-kits-modules/ Wiki: https://elinux.org/Jetson_TX2 Test results The Yocto Project releases in the table below have been…

Did anyone get Mender to work with the Jetson Nano yet, even though it’s based on the tegra210 platform? I’m trying to make this work, but I’ve never used Mender before, and it seems like u-boot-bup-payload is purely tegra186 compatible. There’s also a hard dependency on tegra186-redundant-boot, whi…

How can I flash image to SATA drive instead of eMMC? I tried to change MENDER_ROOTFS_PART_A to “/dev/sda3” and MENDER_ROOTFS_PART_B to “/dev/sda4” accordingly with no luck - device stuck on “nvidia” logo during boot

@copycat I’ve never tried this but I expect it’s probably more complicated than just changing the mender partitions. If I were going to try it I’d start by putting together an image based on NVIDIA sources that can boot to SATA, then attempt to replicate that setup with meta-tegra . Once you have i…

NVIDIA Tegra Jetson TX2

Board Integrations Yocto Project

Topic		Replies	Views
NVIDIA Tegra AGX Xavier Yocto Project yocto , nvidia , dunfell	0	1919	October 4, 2020
NVIDIA Tegra Jetson Xavier NX Yocto Project nvidia , dunfell	25	7108	May 4, 2022
NVIDIA Tegra Jetson Nano Yocto Project yocto , nvidia , warrior	31	12530	May 2, 2024
Mender not building with yocto due to issues with u-boot General Discussions yocto , mender-client , jetson	14	608	September 17, 2024
Problem flashing NVIDIA Jetson TX2 General Discussions	3	931	January 26, 2020

NVIDIA Tegra Jetson TX2

Related topics