The official Mender documentation explains how Mender works. This is simply a board-specific complement to the official documentation. Board description Measuring only 50mm x 25mm, the DART-6UL is a highly flexible System-on-Module (SoM) based on NXP/Freescale’s i.MX 6UltraLite or i.MX 6ULL ARM Cor…

[image] drewmoseley: Remove the SD Card from your build host and insert it into the target. Configure your board to boot from SD Card by setting the Boot Select switches to position “00”. Now turn on power to the board and it will boot from the SDCard and Mender will connect to the server config…

We need more information to help. From a shell prompt on your board what does journalctl -u mender-client show? Drew

– Logs begin at Wed 2021-06-16 01:34:34 UTC, end at Wed 2021-06-16 01:39:18 UTC . – Jun 16 01:36:36 imx6ul-var-dart systemd[1]: Started Mender OTA update service. Jun 16 01:36:37 imx6ul-var-dart mender[394]: time=“2021-06-16T01:36:37Z” level=i nfo msg=“Loaded configuration file: /var/lib/mender/…

root@imx6ul-var-dart:~# mender --log-level debug daemon DEBU[0000]/home/herodev/mender-variscite-zeus/build/tmp/work/cortexa7t2hf-neon-fslc-linux-gnueabi/mender-client/2.6.0-r0/build/src/github.com/mendersoftware/mender/conf/config.go:211 github.com/mendersoftware/mender/conf.readConfigFile() Readi…

The time should synchronize automatically if there is an active network connection. It may take some time but unless you have changed the systemd recipe config I am fairly certain it is enabled by default. The other errors do appear to be some kind of networking issue. You are using 10.1.1.2 as yo…

Thanks Drew! The target was not connected to internet.

@drewmoseley , I tried to use export MEDIA=“emmc” I created the image still using this command: sudo dd if=tmp/deploy/images/hero-secc/hero-secc-firmware-release-hero-secc.sdimg of=/dev/sdb conv=fdatasync bs=8M then boot via sdcard which was successful but when I try to write the image to emmc vi…

The emmc-based sdimg file is not automatically part of the sdcard image. You’ll need to use a USB key or separate sdcard to transfer that file from your build system. Drew

Thanks Drew! I was able to perform dd command but when the target boots, I got this errror: [FAILED] Failed to mount /data. See ‘systemctl status data.mount’ for details. [[0;1;31mWarning:[[0m The unit file, source configuration file or drop-ins of da ta.mount changed on disk. Run ‘systemctl da…

Do you really need 3G partitions? That seems like a lot. Does the board have 8G? Drew

Variscite DART-6UL

Board Integrations Yocto Project

Topic		Replies	Views
Variscite DART-6UL: U-boot integration succeeds with Yocto Sumo, but fails with Thud General Discussions yocto , thud	24	4370	July 12, 2021
After meta-mender integration the target (Variscite imx6UL) cannot boot Yocto Project yocto , zeus	13	1313	July 6, 2021
Error when following Variscite DART-6UL page General Discussions	13	1619	June 24, 2021
Variscite VAR-SOM-MX8M-MINI : NXP i.MX 8M Mini Yocto Project	23	7279	August 19, 2024
Create Demo Image for Sama7G54-EK Board General Discussions yocto	33	1692	November 21, 2023

Variscite DART-6UL

Related topics