Dear, We are currently on a Mender Professional plan and are adding support for a new (community supported) device: a Jetson Xavier NX. When trying to apply a delta update on this device, it fails. The delta update has the following properties: Rootfs size: 6973030400 rootfs_image_checksum: 592a…

I have identified at least one regression in mender-binary-delta 1.2.0, related to integer overflow. Is this the one you are using? If so, can you try to revert to version 1.1.1, and see if it works?

Thanks for your reply. We are currently using 1.2.0. However, I cannot test with 1.1.1 because of this issue: https://tracker.mender.io/browse/MEN-4246 One last note: we are using the same version (1.2.0) on different hardware (Jetson TX2) and it works fine there.

Hey @nielsavonds , MEN-4246 is fixed in mender-binary-delta 1.1.1, it is only 1.1.0 which has this problem.

I did another test using mender-binary-delta 1.1.1, which yields the same results. So the test I did was the following: Flash the root filesystem. This build still contained mender-binary-delta 1.2.0 but I figured this wouldn’t matter Do a full upgrade to a build that contains mender-binary-delta …

Hey @nielsavonds , The issue I mentioned previously, although a bug, doesn’t seem to be related to your issue. I’ve made multiple attempts at trying to reproduce this, but I have come up empty-handed. Is there any chance I could get my hands on the delta artifact? For the moment I do not need the s…

Thanks for the image @nielsavonds , with this I was able to rule out several potential problems. The internal headers match the expected size of 6973030400 exactly, so it should ignore the “empty space” that you asked about earlier, since this is outside of that range. And all other aspects of the he…

Hi Kristian, Thanks for your response. This is the /etc/mender/mender.conf: { "ArtifactVerifyKey": "/etc/mender/artifact-verify-key.pem", "InventoryPollIntervalSeconds": 28800, "RetryPollIntervalSeconds": 300, "ServerURL": "https://hosted.mender.io", "StateScriptRetryTimeoutSeconds": 86400, "Tenan…

I’m very happy to hear that you worked it out. Indeed it was a setup error, but mender-binary-delta should have produced better error messages to uncover this. I have made some changes to the partition detection code so this should be easier to reveal if it happens again. Thanks for the update!

Can this be related to my issue? [image] Server matches wrong artifact during deployment General Discussions We have a test machine booted with release version 6 (which was installed manually with a rootfs-image local file with mender install version6.mender). Our cloud s…

Delta updates checksum mismatch

General Discussions

bender March 17, 2021, 4:06pm 10

Can this be related to my issue?

Topic		Replies	Views
Delta update rootfs error General Discussions	9	1439	December 13, 2019
Delta update update module checksum error General Discussions	33	2050	April 19, 2022
Delta apply fail with "xdelta3: target window checksum mismatch: XD3_INVALID_INPUT" General Discussions	14	11953	June 26, 2020
No Artifacts found error when trying delta-updates General Discussions	31	2047	October 16, 2020
VAR-SOM-IMX8MM binary-delta update bad behavior General Discussions	5	806	May 19, 2021

Delta updates checksum mismatch

Related topics