Description The Deb Update Module updates software on the device using the native local package manager. A Mender Artifact containing one or more software packages is sent to the device, where the Update Module will call the package manager to install them in alphabetical order. Specification Module name deb Supports rollback no Requires restart no Artifact generation script no Full operating system updater no Source code Update Module Maintainer Community Prepare the device This section describes how to setup your target device, i.e. the device to be updated. This will also be referred to as the device environment. All commands outlined in this section should be run in the device environment. Prerequisites This update module has the following prerequisites for the device environment: Install the Mender client, version 2.0 or later Install the Update Module Download the latest version of this Update Module by running: mkdir -p /usr/share/mender/modules/v3 && wget -P /usr/share/mender/modules/v3 https://raw.githubusercontent.com/mendersoftware/mender-update-modules/master/deb/module/deb Prepare the development environment on your workstation This section describes how to set up your development environment on your workstation. All commands outlined in this section should be run in the development environment. Prerequisites This Update Modules has the following prerequisites for the development environment: Install mender-artifact , version 3.1.0 or later Create Mender Artifacts The Artifact can be generated using the mender-artifact tool. Now generate a Mender Artifact using the following command: ARTIFACT_NAME="my-update-1.0" DEVICE_TYPE="my-device-type" OUTPUT_PATH="my-update-1.0.mender" PACKAGES="my-package-1.deb my-package-2.deb" mender-artifact write module-image -T deb -n ${ARTIFACT_NAME} -t ${DEVICE_TYPE} -o ${OUTPUT_PATH} -f $(echo "$PACKAGES" | sed -e 's/ / -f /g') ARTIFACT_NAME - The name of the Mender Artifact DEVICE_TYPE - The compatible device type of this Mender Artifact OUTPUT_PATH - The path where to place the output Mender Artifact. This should always have a .mender suffix PACKAGES - List of all .deb packages to be contained in the Artifact. You can either deploy this Artifact in managed mode with the Mender server (upload it under Releases in the server UI) or by using the Mender client only in Standalone deployments. Artifact technical details The Mender Artifact used by this Update Module has a payload with as many files as software packages we are contained in the Artifact. The Mender Artifact contents will look like: Updates: - Type: deb Provides: rootfs-image.deb.version: my-update-1.0 Depends: {} Clears Provides: [rootfs-image.deb.*] Metadata: {} Files: - checksum: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 modified: 2024-11-07 12:00:03 +0100 CET name: my-package-1.deb size: 0 - checksum: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 modified: 2024-11-07 12:00:03 +0100 CET name: my-package-2.deb size: 0

Thanks for that. What is the best way to run sudo apt —fix-broken-install on the remote client?

Hi @mladen.miljic, you can always ssh into the device and run the command manually. Alternatively you can setup a state script to run that. Depending on your needs a preinstall or a postinstall script might be the best choice. Drew

So this will install all the packages in the artifact as oppose to using the mender script to install the artifact in the new partition and switch over? So kind of like an apt-get update for your embedded os? I am assuming this takes care of kernel and system level files and patches?

Yes, this particular implementation simply installs into the active root filesystem. You have to be careful with kernel updates this way to make sure the files are put in the same location as is expected by the Mender bootloader logic but otherwise it should work. You will need an explicit reboot in that case.

[image] kacf: [image]Are state scripts available for mender standalone artifact updates? Are state scripts available for mender standalone artifact updates? Since Mender 2.0.0, some state scripts (not all) can run in standalone mode. Thanks. I noticed the Download Leave was not available but I was able to use the ArtifactInstall_Enter to run the script to save the SSH Keys. I am not sure why the output show as ERR when there wasn’t any errors, but the scripts seems to work.

Hi @drewmoseley, thanks a lot fore the reply. I understand, the update module will call: dpkg -i [package…deb] For me, that ends for in manual handling to resolve dependencies. What is the reason you decided to go with dpkg -i ./name.deb instead of apt install ./name.deb (the apt install does actually do dpkg -i ./name.deb and then apt-get install -f which resolves the dependencies.

This is really intended as a reference implementation and not necessarily as the best way to do this for any use case. We don’t really want to rely on external package repositories with this reference implementation since that basically cedes control of the software contents to the provider of the external repo. You could certainly implement an apt based update module and I think it would be a good reference implementation here on Mender hub. Drew

Deb packages

Update Modules

Topic	Replies	Views
How to update .deb package with a Raspberry Pi 3 Mender	5758	October 4, 2019
Rpm packages Update Modules	2634	April 23, 2019
IPK packages Update Modules	2198	September 23, 2019
[ Topic template ] for contributing Update Modules Update Modules how-to	2009	March 7, 2019
How to install a new Update Module Update Modules	488	March 15, 2024

Deb packages

Related topics