# \#variscite **URL:** https://hub.mender.io/tag/variscite/201.md [Latest](https://hub.mender.io/latest.md) · [Categories](https://hub.mender.io/categories.md) · [Tags](https://hub.mender.io/tags.md) --- ## [Variscite var-som-mx8m-nano - Debian Trixie](https://hub.mender.io/t/variscite-var-som-mx8m-nano-debian-trixie/8060)
**Author:** [@lueschem](https://hub.mender.io/u/lueschem)\ **Replies:** 0\ **Last updated:** [October 24, 2025, 9:05am UTC](https://hub.mender.io/t/variscite-var-som-mx8m-nano-debian-trixie/8060 "2025-10-24T09:05:57Z")
Summary The edi-var project configuration allows you to build Mender enabled system and update artifacts for Variscite var-som-mx8m-nano SoMs. Furthermore the same configuration can be used to build a Podman/Docker imag… --- ## [SPL not booting into main u-boot when loading using NXPs UUU tool and mender-uboot is enabled](https://hub.mender.io/t/spl-not-booting-into-main-u-boot-when-loading-using-nxps-uuu-tool-and-mender-uboot-is-enabled/4042)
**Author:** [@Ossian](https://hub.mender.io/u/Ossian)\ **Replies:** 6\ **Last updated:** [April 2, 2024, 1:15pm UTC](https://hub.mender.io/t/spl-not-booting-into-main-u-boot-when-loading-using-nxps-uuu-tool-and-mender-uboot-is-enabled/4042 "2024-04-02T13:15:18Z")
I’m attempting to load u-boot using the NXP UUU tool into a Variscite DART board with an i.MX8m-plus board. When I generate the standard u-boot image in Yocto and load the image through the UUU tool, all boots as expect… --- ## [Variscite VAR-SOM-MX8M-MINI : NXP i.MX 8M Mini - Kirkstone](https://hub.mender.io/t/variscite-var-som-mx8m-mini-nxp-i-mx-8m-mini-kirkstone/5757)
**Author:** [@estape.nt](https://hub.mender.io/u/estape.nt)\ **Replies:** 1\ **Last updated:** [May 2, 2023, 6:40am UTC](https://hub.mender.io/t/variscite-var-som-mx8m-mini-nxp-i-mx-8m-mini-kirkstone/5757 "2023-05-02T06:40:41Z")
Board description The VAR-SOM-MX8M-MINI is a highly scalable, low power System on Module (SoM), offering a mainstream solution to fit a wide range of applications and cost requirements. Based on NXP’s i.MX 8M Mini with … --- ## [Yocto u-boot build "is not clean, please run 'make mrproper' error](https://hub.mender.io/t/yocto-u-boot-build-is-not-clean-please-run-make-mrproper-error/4022)
**Author:** [@Ossian](https://hub.mender.io/u/Ossian)\ **Replies:** 3\ **Last updated:** [December 8, 2022, 5:43pm UTC](https://hub.mender.io/t/yocto-u-boot-build-is-not-clean-please-run-make-mrproper-error/4022 "2022-12-08T17:43:02Z")
I’m trying to build Mender under Yocto gatesgarth for a Variscite board. I realize that gatesgarth is not supported, but Variscite is not supporting dunfell. So, I’m attempting to build the dunfell meta-mender under gate… --- ## [Dart-mx6ul grub integration mac address not set](https://hub.mender.io/t/dart-mx6ul-grub-integration-mac-address-not-set/5086)
**Author:** [@rlaybourn](https://hub.mender.io/u/rlaybourn)\ **Replies:** 1\ **Last updated:** [July 5, 2022, 8:15am UTC](https://hub.mender.io/t/dart-mx6ul-grub-integration-mac-address-not-set/5086 "2022-07-05T08:15:19Z")
Hi I am using a varicite DART-mx6ul board and as per the board integrations section it is using the grub integration for booting. I have a problem that the OTP fuse setting a mac address for the module is loaded ok into … --- ## [MAC address keep changing every re-connection to the internet](https://hub.mender.io/t/mac-address-keep-changing-every-re-connection-to-the-internet/4856)
**Author:** [@marizonne.villafranc](https://hub.mender.io/u/marizonne.villafranc)\ **Replies:** 3\ **Last updated:** [April 15, 2022, 12:00am UTC](https://hub.mender.io/t/mac-address-keep-changing-every-re-connection-to-the-internet/4856 "2022-04-15T00:00:37Z")
Hi, I noticed that every time the client re-connects to the mender server, the mac address which is the one used for identification is changed. I would like to ask which mac address does mender grab? Is it the mac addre… --- ## [Mender\_grubenv.config has wrong file path to grub files](https://hub.mender.io/t/mender-grubenv-config-has-wrong-file-path-to-grub-files/4579)
**Author:** [@rlaybourn](https://hub.mender.io/u/rlaybourn)\ **Replies:** 3\ **Last updated:** [February 10, 2022, 7:43am UTC](https://hub.mender.io/t/mender-grubenv-config-has-wrong-file-path-to-grub-files/4579 "2022-02-10T07:43:40Z")
I have a problem where rootfs updates are failing due to “No match between boot and root partitions”. I am thinking this may be because fw\_printenv is unable to read the boot environment variables. The problem seems to b… --- ## [Client can't connect to mender demo server](https://hub.mender.io/t/client-cant-connect-to-mender-demo-server/4034)
**Author:** [@marizonne.villafranc](https://hub.mender.io/u/marizonne.villafranc)\ **Replies:** 1\ **Last updated:** [August 27, 2021, 7:35am UTC](https://hub.mender.io/t/client-cant-connect-to-mender-demo-server/4034 "2021-08-27T07:35:53Z")
Hi, I tried to connect to the mender demo server. This is my local.conf: # Build for Mender demo server # # https://docs.mender.io/getting-started/create-a-test-environment # # Uncomment below and update IP address to…