# Variscite VAR\_DART\_IMX8MM Problem

**URL:** <https://hub.mender.io/t/variscite-var-dart-imx8mm-problem/2811>\
**Category:** General Discussions\
**Created:** [November 10, 2020, 5:10pm UTC](https://hub.mender.io/t/variscite-var-dart-imx8mm-problem/2811 "2020-11-10T17:10:04Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![jafotes](https://avatars.discourse-cdn.com/v4/letter/j/e79b87/32.png) [@jafotes](https://hub.mender.io/u/jafotes)\
**Post date:** [November 16, 2020, 12:38pm UTC](https://hub.mender.io/t/variscite-var-dart-imx8mm-problem/2811/13 "2020-11-16T12:38:26Z")

</div>

Hi @drewmoseley.

After test some images today I finally got an image with just U-BOOT running in var-dart-imx8mm with BSP 5.4.3 from Variscite (they do not support yet the new BSP for this board).

I just had to add this line to u-boot-variscite.bbappend to the board boot up succesfully to kernel.

> KERNEL\_DEVICETREE = “freescale/imx8mm-var-dart.dtb”

---

_[View the full topic](https://hub.mender.io/t/variscite-var-dart-imx8mm-problem/2811)._