# Updating the boot partition on Raspberry using Debian (non Yocto)

**URL:** <https://hub.mender.io/t/updating-the-boot-partition-on-raspberry-using-debian-non-yocto/3207>\
**Category:** General Discussions\
**Created:** [February 11, 2021, 12:54pm UTC](https://hub.mender.io/t/updating-the-boot-partition-on-raspberry-using-debian-non-yocto/3207 "2021-02-11T12:54:36Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![oleorhagen](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/oleorhagen/32/297_2.png) [@oleorhagen](https://hub.mender.io/u/oleorhagen)\
**Post date:** [February 11, 2021, 3:01pm UTC](https://hub.mender.io/t/updating-the-boot-partition-on-raspberry-using-debian-non-yocto/3207/2 "2021-02-11T15:01:25Z")

</div>

Hi @dwjbosman

Any chance you could post the logs to begin with?

Also, have a look at [this](https://hub.mender.io/t/updating-raspberry-pi-boot-firmware-files-using-yocto-project-and-mender/1719), even though it is not for mender-convert, I think it is informal.

In general, /boot is mounted as a separate partition. Have a look in fstab, to make sure if it is boot, or /uboot (I think it is /uboot/ in this case).

So, in short, everything written to the `boot` partition is kept, as it is a separate partition.

The rest of your questions I think I need a log to look further into

---

_[View the full topic](https://hub.mender.io/t/updating-the-boot-partition-on-raspberry-using-debian-non-yocto/3207)._