# Update-not-working-reporting-incorrect-artifact-name-reboot-does-not-work

**URL:** <https://hub.mender.io/t/update-not-working-reporting-incorrect-artifact-name-reboot-does-not-work/6706>\
**Category:** General Discussions\
**Tags:** raspberry-pi-4, kirkstone\
**Created:** [April 5, 2024, 8:22am UTC](https://hub.mender.io/t/update-not-working-reporting-incorrect-artifact-name-reboot-does-not-work/6706 "2024-04-05T08:22:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![santiwake](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/santiwake/32/2100_2.png) [@santiwake](https://hub.mender.io/u/santiwake)\
**Post date:** [April 5, 2024, 8:22am UTC](https://hub.mender.io/t/update-not-working-reporting-incorrect-artifact-name-reboot-does-not-work/6706/1 "2024-04-05T08:22:36Z")

</div>

I have created new releases and deployments, afterwords both the client on the device and the server report the new release. However, the image is not the new one. I can imagine the device is not starting on the correct partition. I used the image to flash directly and the image contains my changes.

I check this post but I don’t have this `cat /etc/fw_env.config`

[Update not working - reporting incorrect artifact name and reboot required - General Discussions - Mender Hub](https://hub.mender.io/t/update-not-working-reporting-incorrect-artifact-name-and-reboot-required/2700)