# Unable to boot raspberry pi 4 using offical image

**URL:** <https://hub.mender.io/t/unable-to-boot-raspberry-pi-4-using-offical-image/3672>\
**Category:** General Discussions\
**Tags:** raspberry-pi-4, u-boot\
**Created:** [May 24, 2021, 5:27pm UTC](https://hub.mender.io/t/unable-to-boot-raspberry-pi-4-using-offical-image/3672 "2021-05-24T17:27:22Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![drewmoseley](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/drewmoseley/32/47_2.png) [@drewmoseley](https://hub.mender.io/u/drewmoseley)\
**Post date:** [May 25, 2021, 12:14pm UTC](https://hub.mender.io/t/unable-to-boot-raspberry-pi-4-using-offical-image/3672/4 "2021-05-25T12:14:22Z")

</div>

It’s possible you need to manually enable ‘ENABLE\_UART=1’ in config.txt. That was recently discussed [here](https://hub.mender.io/t/raspberry-pi-4-model-b/889/33). See that post for more context and let us know if that gets you unstuck.

Drew

---

_[View the full topic](https://hub.mender.io/t/unable-to-boot-raspberry-pi-4-using-offical-image/3672)._