# Ubifs ECC errors after adding Mender to Toradex iMX6ULL Image

**URL:** <https://hub.mender.io/t/ubifs-ecc-errors-after-adding-mender-to-toradex-imx6ull-image/1767>\
**Category:** General Discussions\
**Tags:** yocto, nxp, thud\
**Created:** [April 8, 2020, 1:58pm UTC](https://hub.mender.io/t/ubifs-ecc-errors-after-adding-mender-to-toradex-imx6ull-image/1767 "2020-04-08T13:58:16Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![drewmoseley](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/drewmoseley/32/47_2.png) [@drewmoseley](https://hub.mender.io/u/drewmoseley)\
**Post date:** [April 8, 2020, 3:05pm UTC](https://hub.mender.io/t/ubifs-ecc-errors-after-adding-mender-to-toradex-imx6ull-image/1767/2 "2020-04-08T15:05:59Z")

</div>

Hi @Goz3rr welcome to Mender hub.

I don’t see anything immediately suspicious in your steps. It all looks about like what I would do. I know getting the UBI/MTD parameters right can be a bit tricky so that’s where I would first look.

There is another forum post on a similar platform that maybe helpful here: [Imx6ull NAND Flash](https://hub.mender.io/t/imx6ull-nand-flash/1451/3)

Drew

---

_[View the full topic](https://hub.mender.io/t/ubifs-ecc-errors-after-adding-mender-to-toradex-imx6ull-image/1767)._