# Time for an update?

**URL:** <https://hub.mender.io/t/time-for-an-update/1844>\
**Category:** General Discussions\
**Tags:** raspberry-pi-3\
**Created:** [April 27, 2020, 7:28am UTC](https://hub.mender.io/t/time-for-an-update/1844 "2020-04-27T07:28:03Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![dellgreen](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/dellgreen/32/85_2.png) [@dellgreen](https://hub.mender.io/u/dellgreen)\
**Post date:** [April 27, 2020, 7:20pm UTC](https://hub.mender.io/t/time-for-an-update/1844/10 "2020-04-27T19:20:22Z")

</div>

There was a discussion below that may shed a little bit more light on your issue.

> [@Mender standalone installation progress last few percent very long](https://hub.mender.io/t/mender-standalone-installation-progress-last-few-percent-very-long/1464):
>
> Using mender install in standalone mode, on the stdout the first 0-99% takes 3 mins and then I’m seeing a further 3 mins to get from 99% to 100%. Is there some kind of verification phase happening causing the duplication of time, as there is no progress state change during this last percent to indicate what is happening

---

_[View the full topic](https://hub.mender.io/t/time-for-an-update/1844)._