# Supporting various RPi Compute Modules in one image **URL:** \ **Category:** General Discussions\ **Tags:** debian, raspberry-pi-3, raspberrypi-cm3, raspberry-pi-4\ **Created:** [March 14, 2024, 10:27am UTC](https://hub.mender.io/t/supporting-various-rpi-compute-modules-in-one-image/6625 "2024-03-14T10:27:13Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![bztry](https://avatars.discourse-cdn.com/v4/letter/b/6a8cbe/32.png) [@bztry](https://hub.mender.io/u/bztry)\ **Post date:** [March 14, 2024, 12:32pm UTC](https://hub.mender.io/t/supporting-various-rpi-compute-modules-in-one-image/6625/3 "2024-03-14T12:32:23Z")
Hi @TheYoctoJester , thank you for this speedy feedback. Great forum with lots of tips here! Misused the word β€œfork” on my end, apologies πŸ™‚ What I tried so far with my CM3 device: Flashed the original RpiOS (Bullseye, 32-bit, latest version) to USB β†’ Booted fine Flashed the mender Rpi3 image from here: [Prepare a Raspberry Pi device | Mender documentation](https://docs.mender.io/get-started/preparation/prepare-a-raspberry-pi-device) to USB β†’ Did not boot Run mender-convert on the original RpiOS from above, flashed to USB β†’ Did not boot And _while writing this post_, I decided to stick the USB in my normal rpi3 (not cm3) to try if it works and it looks like it does not, while it does work from sd-card. I just never noticed because I always run standard pis with sdcards and my CM3/CM4 devices have either USB or eMMC boot. Which leads me to believe my issue is a duplicate of this thread?: [Booting a converted image from USB - #5 by sdynes](https://hub.mender.io/t/booting-a-converted-image-from-usb/4197/5) I’ve also got some CM4 / CM4S devices (can only test with them next week) which have an integrated eMMC storage. Is eMMC also affected by this issue? I can gladly test the workaround β€œkacf” mentioned in the other thread, but I do not know how πŸ˜ƒ Kind regards --- _[View the full topic](https://hub.mender.io/t/supporting-various-rpi-compute-modules-in-one-image/6625)._