# Storage SD card or eMMC flash memory

**URL:** <https://hub.mender.io/t/storage-sd-card-or-emmc-flash-memory/5145>\
**Category:** Debian family\
**Created:** [July 21, 2022, 1:27pm UTC](https://hub.mender.io/t/storage-sd-card-or-emmc-flash-memory/5145 "2022-07-21T13:27:43Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![akhiljain](https://avatars.discourse-cdn.com/v4/letter/a/b2d939/32.png) [@akhiljain](https://hub.mender.io/u/akhiljain)\
**Post date:** [July 21, 2022, 1:27pm UTC](https://hub.mender.io/t/storage-sd-card-or-emmc-flash-memory/5145/1 "2022-07-21T13:27:43Z")

</div>

# SD or eMMC flash memory

Hi,

We have an edge device with inbuilt eMMC flash memory on raspberry cm3 having the capacity of 4 GB and a SD card slot where we have 32GB card inserted. I would want to understand how I can properly mount the image on the device. I have the mender image but I won’t be able to run it on an eMMC card due to the limitation of 4GB. However, I would want to mount the image on eMMC flash. Is it possible to make use of both the cards to flash the mender image?  
Best, Akhil