# Raspbian Stretch: Mender-converted vs original image - missing symbolic links in /boot - Picamera firmware missing **URL:** \ **Category:** General Discussions\ **Tags:** raspberry-pi-3\ **Created:** [April 7, 2021, 2:55pm UTC](https://hub.mender.io/t/raspbian-stretch-mender-converted-vs-original-image-missing-symbolic-links-in-boot-picamera-firmware-missing/3471 "2021-04-07T14:55:21Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![raj.panchal](https://avatars.discourse-cdn.com/v4/letter/r/ecb155/32.png) [@raj.panchal](https://hub.mender.io/u/raj.panchal)\ **Post date:** [April 8, 2021, 12:51pm UTC](https://hub.mender.io/t/raspbian-stretch-mender-converted-vs-original-image-missing-symbolic-links-in-boot-picamera-firmware-missing/3471/3 "2021-04-08T12:51:48Z")
Hi Eystein: Thank you for the prompt reply. The post [Raspberry Pi 4 Model B + Raspbian](https://hub.mender.io/t/raspberry-pi-4-model-b-raspbian/1312) mentions Known issues: 1. raspi-config does not work as expected on a converted image 2. Boot firmware files Raspberry Pi boards have a set of boot firmware files that are located on the vfat boot part, and a selection of these files are: bootcode.bin fixup.dat fixup\_cd.dat fixup\_db.dat fixup\_x.dat start.elf start\_cd.elf start\_db.elf start\_x.elf Does the next release of mender-convert address the above two issues? I may need some help/guidance with adding the fix to my mender-convert setup as I am not so knowledgeable in git commands for adding the patches. And I cannot afford messing up my working mender-convert setup. While back Drew helped me guiding through the process and I don’t remember all the steps to get mender-convert setup. I greatly appreciate your help. Thanks, Raj --- _[View the full topic](https://hub.mender.io/t/raspbian-stretch-mender-converted-vs-original-image-missing-symbolic-links-in-boot-picamera-firmware-missing/3471)._