# Raspberrypi CM3 warrior broken

**URL:** <https://hub.mender.io/t/raspberrypi-cm3-warrior-broken/2115>\
**Category:** General Discussions\
**Created:** [June 26, 2020, 3:40pm UTC](https://hub.mender.io/t/raspberrypi-cm3-warrior-broken/2115 "2020-06-26T15:40:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\
**Post date:** [June 26, 2020, 3:40pm UTC](https://hub.mender.io/t/raspberrypi-cm3-warrior-broken/2115/1 "2020-06-26T15:40:59Z")

</div>

Hi,

I have build for RPI CM3 from warrior branch and board boot to u-boot but last message is (when enabled console in u-boot)

```auto
[1.748729] of_cfs_init: OK
[1.752027] uart-pl011 3f201000.serial: no DMA platform data
[1.757884] Waiting for root device ...
[1.832579] mmc0: new high speed MMC card at address 0001
[1.839111] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
[1.844430] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
[1.851133] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
[1.857423] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB, chardev (246:0)
[1.866512] mmcblk0: p1 p2 p3 p4

```

Looks like issue with emmc or something. Just curious if maybe someone have it working before I start digging on problem ;). Thanks.

---

<div class="post-metadata">

**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\
**Post date:** [June 26, 2020, 4:27pm UTC](https://hub.mender.io/t/raspberrypi-cm3-warrior-broken/2115/2 "2020-06-26T16:27:41Z")

</div>

Actually root was not properly set. Sorry for noise