# Raspberry Pi 5 setup

**URL:** <https://hub.mender.io/t/raspberry-pi-5-setup/7139>\
**Category:** General Discussions\
**Created:** [August 24, 2024, 7:02am UTC](https://hub.mender.io/t/raspberry-pi-5-setup/7139 "2024-08-24T07:02:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![msf](https://avatars.discourse-cdn.com/v4/letter/m/cdc98d/32.png) [@msf](https://hub.mender.io/u/msf)\
**Post date:** [August 24, 2024, 7:02am UTC](https://hub.mender.io/t/raspberry-pi-5-setup/7139/1 "2024-08-24T07:02:22Z")

</div>

Hi everyone,

I followed the instructions to setup a Raspberry Pi 5 with Mender as outlined here:

> [@Raspberry Pi 5](https://hub.mender.io/t/raspberry-pi-5/6689):
>
> Board description The Raspberry Pi 5 Model is a popular single board computer based on Broadcom SoCs. It is the most recent board within the Raspberry Pi family. URL: [https://www.raspberrypi.com/products/raspberry-pi-5/](https://www.raspberrypi.com/products/raspberry-pi-5/?target=_blank) Wiki: [https://elinux.org/RPi\_Hub](https://elinux.org/RPi_Hub?target=_blank)Test results Raspberry Pi 5 is a community contributed board integration, extending the range of supported RPi family boards to the newest and most powerful interation. The Yocto Project releases in the table below have been…

However, my Raspberry Pi 5 boots to a terminal based login screen for which I do not have the password.

Online sources indicate that the user should be “root” with a blank password but this did not work.

If someone can point me in the right direction I would greatly appreciate it.