# Raspberry Pi 3 Model B/B+

**URL:** <https://hub.mender.io/t/raspberry-pi-3-model-b-b/57>\
**Category:** Yocto Project\
**Tags:** yocto, raspberry-pi, sumo, rocko, thud, warrior\
**Created:** [September 28, 2018, 1:07pm UTC](https://hub.mender.io/t/raspberry-pi-3-model-b-b/57 "2018-09-28T13:07:59Z")\
**Posts on this page:** 1\
**Showing post:** 29

<div class="post-metadata">

**Author:** ![abartky](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/abartky/32/1610_2.png) [@abartky](https://hub.mender.io/u/abartky)\
**Post date:** [May 13, 2022, 8:58pm UTC](https://hub.mender.io/t/raspberry-pi-3-model-b-b/57/29 "2022-05-13T20:58:24Z")

</div>

I know this is a “how to get started”, but it might be worth adding when building the Yocto for Mender, you should also put in a unique release name. Otherwise, you’ll get multiple .mender files that that show up as the template text of “release-1” as you do more builds.

Here is what I did in my setup, I use what I’m building plus the date and time.

```auto
# The name of the disk image and Artifact that will be built.
# This is what the device will report that it is running, and different updates
# must have different names because Mender will skip installation of an Artifact
# if it is already installed.
MENDER_ARTIFACT_NAME = "rpi3-20220512-1956"

```

---

_[View the full topic](https://hub.mender.io/t/raspberry-pi-3-model-b-b/57)._