# Orange Pi 3 Ubuntu Bionic

**URL:** <https://hub.mender.io/t/orange-pi-3-ubuntu-bionic/1673>\
**Category:** General Discussions\
**Tags:** ubuntu, orangepi, orange-pi, mender-convert\
**Created:** [March 22, 2020, 6:48pm UTC](https://hub.mender.io/t/orange-pi-3-ubuntu-bionic/1673 "2020-03-22T18:48:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![imed-humatics](https://avatars.discourse-cdn.com/v4/letter/i/f07891/32.png) [@imed-humatics](https://hub.mender.io/u/imed-humatics)\
**Post date:** [March 22, 2020, 6:48pm UTC](https://hub.mender.io/t/orange-pi-3-ubuntu-bionic/1673/1 "2020-03-22T18:48:38Z")

</div>

How would I go about adding support for Orange Pi3?  
I have a golden image running Ubuntu 18.04 LTS that I would like to modify using `mender-convert`.  
If anyone could point to where I should start, I’d really appreciate it.

---

<div class="post-metadata">

**Author:** ![ajithpv](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/ajithpv/32/728_2.png) [@ajithpv](https://hub.mender.io/u/ajithpv)\
**Post date:** [March 23, 2020, 8:26am UTC](https://hub.mender.io/t/orange-pi-3-ubuntu-bionic/1673/2 "2020-03-23T08:26:20Z")

</div>

Welcome to the Mender Hub community!

Please add your queries to the “[General discussions](https://hub.mender.io/c/general-discussions/)” instead of “[Board integrations](https://hub.mender.io/c/board-integrations/)”.

There is a Debian example present for the Raspberry Pi 3 in the following link:

> [@Raspberry Pi 3 Model B/B+ Raspbian](https://hub.mender.io/t/raspberry-pi-3-model-b-b-raspbian/140/1):
>
> Board description The Raspberry Pi 3 Model B/B+ is a popular single board computer based on Broadcom SoCs. It is the most powerful board within the Raspberry Pi family and probably the most popular with “makers”. [770A5842-462x322] URL: [https://www.raspberrypi.org/products/raspberry-pi-3-model-b-plus](https://www.raspberrypi.org/products/raspberry-pi-3-model-b-plus?target=_blank) URL: [https://www.raspberrypi.org/products/raspberry-pi-3-model-b](https://www.raspberrypi.org/products/raspberry-pi-3-model-b?target=_blank) Wiki: [https://elinux.org/RPi\_Hub](https://elinux.org/RPi_Hub?target=_blank)Test results The Raspberry Pi OS releases in the table below have been tested by the Mender c…

Since, Orange Pi 3 is a similar platform, I think you can get stated with this link.

You can also refer the board integration section with the Debian family below to know the supported platforms:

> **[Debian family](https://hub.mender.io/c/board-integrations/debian-family/11)**
>
> Board integrations for the Debian family of OSes, for example Debian, Ubuntu, Raspbian.

I hope this helps 🙂