# Octavo Board Integration support?

**URL:** <https://hub.mender.io/t/octavo-board-integration-support/5244>\
**Category:** Other\
**Created:** [September 9, 2022, 11:32pm UTC](https://hub.mender.io/t/octavo-board-integration-support/5244 "2022-09-09T23:32:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![opti545](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/opti545/32/2063_2.png) [@opti545](https://hub.mender.io/u/opti545)\
**Post date:** [September 9, 2022, 11:32pm UTC](https://hub.mender.io/t/octavo-board-integration-support/5244/1 "2022-09-09T23:32:51Z")

</div>

Hello,

I’d like to know if there is any support for integrating any Octavo board, specifically looking for evaluation of the OSD3358-SM-RED board. I know the kernel has already support there, but just wanted to know from a Mender perspective and uboot itself. I believe pocketbeagle is based off of that chipset as well.

Thanks in advance,

---

<div class="post-metadata">

**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\
**Post date:** [September 10, 2022, 6:42am UTC](https://hub.mender.io/t/octavo-board-integration-support/5244/2 "2022-09-10T06:42:35Z")

</div>

Hi and welcome to mender forum. There is no specific Octavo board integration but beaglebone is using similar CPU so I think it can be re-used. Link to beagle integration: [BeagleBone Black - #25 by drewmoseley](https://hub.mender.io/t/beaglebone-black/83/25)

Thanks.