# NXP imx8mm evk don't boot

**URL:** <https://hub.mender.io/t/nxp-imx8mm-evk-dont-boot/585>\
**Category:** General Discussions\
**Tags:** yocto, sumo, nxp\
**Created:** [May 17, 2019, 3:35pm UTC](https://hub.mender.io/t/nxp-imx8mm-evk-dont-boot/585 "2019-05-17T15:35:25Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![walidraach](https://avatars.discourse-cdn.com/v4/letter/w/ac91a4/32.png) [@walidraach](https://hub.mender.io/u/walidraach)\
**Post date:** [November 18, 2019, 1:35pm UTC](https://hub.mender.io/t/nxp-imx8mm-evk-dont-boot/585/19 "2019-11-18T13:35:13Z")

</div>

i just follow this link without any changes(imx8mmevk):[NXP® i.MX 8MQuad Evaluation Kit](https://hub.mender.io/t/nxp-i-mx-8mquad-evaluation-kit/567)  
Compilation done succefuly,Boot with SDcard done also,i flash the image on emmc but i have boot error:mmc1(part 0) is current device  
\*\* Unable to read file boot.scr \*\*  
 ![mmc_list](https://canada1.discourse-cdn.com/flex036/uploads/mender/original/1X/8520462efbc606c97dd86dae9cf728001a63528c.png)

---

_[View the full topic](https://hub.mender.io/t/nxp-imx8mm-evk-dont-boot/585)._