# NVIDIA Tegra Jetson Nano

**URL:** https://hub.mender.io/t/nvidia-tegra-jetson-nano/1360
**Category:** Yocto Project
**Tags:** yocto, nvidia, warrior
**Created:** [December 16, 2019, 1:03pm UTC](https://hub.mender.io/t/nvidia-tegra-jetson-nano/1360 "2019-12-16T13:03:54Z")
**Posts on this page:** 1
**Showing post:** 7

<div class="post-metadata">

### Author: ![ndry](https://avatars.discourse-cdn.com/v4/letter/n/ecb155/32.png) [@ndry](https://hub.mender.io/u/ndry)
#### Post date: [May 27, 2020, 7:51pm UTC](https://hub.mender.io/t/nvidia-tegra-jetson-nano/1360/7 "2020-05-27T19:51:41Z")

</div>

Hi,

I’m new to yocto, mender, and the nano. I followed this guide to get an image successfully, but I get no HDMI output with the base or sato image when I install into my nano dev kit. Am I missing something? Is there debug console output available with these images? I’m connected to the microUSB but have no tty. Do I need to use J41 instead?

---

_[View the full topic](https://hub.mender.io/t/nvidia-tegra-jetson-nano/1360)._