# Missing Device Details After Preauth and Acceptance"

**URL:** <https://hub.mender.io/t/missing-device-details-after-preauth-and-acceptance/7021>\
**Category:** General Discussions\
**Created:** [July 15, 2024, 2:21pm UTC](https://hub.mender.io/t/missing-device-details-after-preauth-and-acceptance/7021 "2024-07-15T14:21:36Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![TheYoctoJester](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/theyoctojester/32/1444_2.png) [@TheYoctoJester](https://hub.mender.io/u/TheYoctoJester)\
**Post date:** [July 15, 2024, 2:39pm UTC](https://hub.mender.io/t/missing-device-details-after-preauth-and-acceptance/7021/2 "2024-07-15T14:39:25Z")

</div>

Hi @sahithi,

Just as pointed out in the other thread at [Preauth state to accepted state - #4 by TheYoctoJester](https://hub.mender.io/t/preauth-state-to-accepted-state/7015/4), the device has to send the inventory. It’s not a management API call or such, but it is the device that needs to send out the data. If it doesn’t show up in a reasonable amount in time, then check the logs of the client device. Also as mentioned, you can also use the `mender-update send-inventory` command to trigger the update.

Greets,  
Josef

---

_[View the full topic](https://hub.mender.io/t/missing-device-details-after-preauth-and-acceptance/7021)._