# Mender - Tinkerboard - Python.h

**URL:** <https://hub.mender.io/t/mender-tinkerboard-python-h/4227>\
**Category:** Other\
**Tags:** tinkerboard, rockchip, u-boot, dunfell\
**Created:** [October 25, 2021, 9:02am UTC](https://hub.mender.io/t/mender-tinkerboard-python-h/4227 "2021-10-25T09:02:09Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![SebSauer](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/sebsauer/32/1486_2.png) [@SebSauer](https://hub.mender.io/u/SebSauer)\
**Post date:** [October 28, 2021, 10:18am UTC](https://hub.mender.io/t/mender-tinkerboard-python-h/4227/8 "2021-10-28T10:18:00Z")

</div>

So when I run it with the Dunfell Branches I run into the Python.h error (which is why I started the thread)

**ALL ON DUNFELL:**

```auto
BBLAYERS ?= " \
  /sources/poky/meta \
  /sources/poky/meta-poky \
  /sources/poky/meta-yocto-bsp \
  /sources/meta-mender/meta-mender-core \
  /sources/meta-openembedded/meta-oe \
  /sources/meta-rockchip \

```

I set it up again and only with local.conf changes: (only this!)  
and bbappend adapted

```auto
MACHINE = "tinker-board-s"
MENDER_ARTIFACT_NAME = "release-1"
INHERIT += "mender-full"
MENDER_FEATURES_ENABLE_append = " mender-uboot mender-image-sd"
MENDER_FEATURES_DISABLE_append = " mender-grub mender-image-uefi"

```

* * *

The second case, occurred only because I tried [Asus Tinker Board](https://hub.mender.io/t/asus-tinker-board/45)  
And the grub-errors appear there. Here also only the changes in local.conf as above.

Thanks!

---

_[View the full topic](https://hub.mender.io/t/mender-tinkerboard-python-h/4227)._