# (MENDER\_STORAGE\_DEVICE: not found) Mender u-boot patches for Toradex U-boot on Apalis imx8x

**URL:** https://hub.mender.io/t/mender-storage-device-not-found-mender-u-boot-patches-for-toradex-u-boot-on-apalis-imx8x/3539
**Category:** Yocto Project
**Tags:** nxp, u-boot, toradex
**Created:** [April 23, 2021, 7:14am UTC](https://hub.mender.io/t/mender-storage-device-not-found-mender-u-boot-patches-for-toradex-u-boot-on-apalis-imx8x/3539 "2021-04-23T07:14:07Z")
**Posts on this page:** 1
**Showing post:** 16

<div class="post-metadata">

### Author: ![ABTP](https://avatars.discourse-cdn.com/v4/letter/a/58f4c7/32.png) [@ABTP](https://hub.mender.io/u/ABTP)
#### Post date: [June 18, 2021, 12:28pm UTC](https://hub.mender.io/t/mender-storage-device-not-found-mender-u-boot-patches-for-toradex-u-boot-on-apalis-imx8x/3539/16 "2021-06-18T12:28:09Z")

</div>

> [@ABTP](#):
>
> I have two issues though, the first one I am familiar with, but the 2nd issue I don’t know what it means or why its happening.
> 
> When I run _mender daemon, I_ get this error:
> 
> > ERRO[0000] Failed to read the current active partition: No match between boot and root partitions.: Failed mender\_saveenv\_canary check. There is an error in the U-Boot setup. Likely causes are: 1) Mismatch between the U-Boot boot loader environment location and the location specified in /etc/fw\_env.config. 2) ‘mender\_setup’ is not run by the U-Boot boot script: exit status 1
> 
> To fix this, I need to update _fw\_env.config_ with the correct _Device name_ , _Device offset_ , and _Env. size_ so that they match those U-Boot is using. How can I go about fixing this issue?
> 
> The 2nd issue is that after the board finishes booting, I get this message repeatedly:
> 
> > mmcblk1: response CRC error sending SET\_BLOCK\_COUNT command, card status 0xc00b00

I provided more information about my setup and current stage in the following post:

[https://hub.mender.io/t/toradex-integration-updates/3763/3?u=abtp](https://hub.mender.io/t/toradex-integration-updates/3763/3)

---

_[View the full topic](https://hub.mender.io/t/mender-storage-device-not-found-mender-u-boot-patches-for-toradex-u-boot-on-apalis-imx8x/3539)._