# Mender on IMX8 + Yocto

**URL:** <https://hub.mender.io/t/mender-on-imx8-yocto/7132>\
**Category:** General Discussions\
**Created:** [August 22, 2024, 11:11pm UTC](https://hub.mender.io/t/mender-on-imx8-yocto/7132 "2024-08-22T23:11:31Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![janaperic](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/janaperic/32/1608_2.png) [@janaperic](https://hub.mender.io/u/janaperic)\
**Post date:** [August 23, 2024, 11:47am UTC](https://hub.mender.io/t/mender-on-imx8-yocto/7132/2 "2024-08-23T11:47:54Z")

</div>

Hi @zapados, YoctoJester is on vacation at this time, so I will try to help you. I have a couple of questions for you:

1. Have you taken a look at this [thread](https://hub.mender.io/t/mender-on-imx8-plus-u-boot-setup-errors/4686/6)? Is it something that could be helpful to you?
2. What error do you get when you run fw\_printenv?
3. Which steps did you follow to integrate u-boot with Yocto and Mender?

Cheers,  
Jana

---

_[View the full topic](https://hub.mender.io/t/mender-on-imx8-yocto/7132)._