# Mender integration for STM32MP135F

**URL:** <https://hub.mender.io/t/mender-integration-for-stm32mp135f/7428>\
**Category:** Board Integrations\
**Tags:** yocto, mender-client\
**Created:** [January 6, 2025, 6:58am UTC](https://hub.mender.io/t/mender-integration-for-stm32mp135f/7428 "2025-01-06T06:58:45Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Anushree](https://avatars.discourse-cdn.com/v4/letter/a/e0b2c6/32.png) [@Anushree](https://hub.mender.io/u/Anushree)\
**Post date:** [January 6, 2025, 6:58am UTC](https://hub.mender.io/t/mender-integration-for-stm32mp135f/7428/1 "2025-01-06T06:58:45Z")

</div>

Hi,  
I am trying to integrate mender for STM32MP135F board.Yocto used is mickeldore with kernel version 6.1.28.  
I downloaded the mender layer from below link as this seems to be compatible with mickelore version.  
git clone -b master-next [GitHub - mendersoftware/meta-mender: Yocto Project meta layer for the Mender client](https://github.com/mendersoftware/meta-mender.git)  
During build I am observing multiple errors.While going through mender community I observed that in few of discussion there is mention of stm32mp1 specific mender layers for thud and kirkstone versions of yocto.I wanted know if there is any specific mender layer for stm32mp1 compatible for mickledore version.  
Regards,  
Anushree

---

<div class="post-metadata">

**Author:** ![TheYoctoJester](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/theyoctojester/32/1444_2.png) [@TheYoctoJester](https://hub.mender.io/u/TheYoctoJester)\
**Post date:** [January 6, 2025, 1:44pm UTC](https://hub.mender.io/t/mender-integration-for-stm32mp135f/7428/2 "2025-01-06T13:44:46Z")

</div>

Hi @Anushree,

Thanks for reaching out. Unfortunately, there is no official support for the `mickledore` release. There might be intermediate states on a `master-next` branch which allow for partial building, but this is subject to change and breakage. `meta-mender` and `meta-mender-community` only support the two latest Yocto LTS releases, which are `kirkstone` and `scarthgap` at the time of this writing.

Greetz,  
Josef

---

<div class="post-metadata">

**Author:** ![upbeat-demise](https://avatars.discourse-cdn.com/v4/letter/u/e495f1/32.png) [@upbeat-demise](https://hub.mender.io/u/upbeat-demise)\
**Post date:** [February 25, 2025, 11:39am UTC](https://hub.mender.io/t/mender-integration-for-stm32mp135f/7428/3 "2025-02-25T11:39:52Z")

</div>

Hello, I am also working on STM32MP135F-DK.

I am looking for a `scarthgap` integration but I don’t find the layer `meta-mender-st-stm32mp` in the `scarthgap` branch but only on the `kirkstone` branch.

I don’t know if for this layer the `kirkstone` branch is compatible with the `scarthgap` branch.  
I also wondering if the integration for STM32MP135F is supported on `kirkstone` as, in the board support index, the board STM32MP157C-DK seems to be not supported. (error on builds).

---

<div class="post-metadata">

**Author:** ![TheYoctoJester](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/theyoctojester/32/1444_2.png) [@TheYoctoJester](https://hub.mender.io/u/TheYoctoJester)\
**Post date:** [February 25, 2025, 2:51pm UTC](https://hub.mender.io/t/mender-integration-for-stm32mp135f/7428/4 "2025-02-25T14:51:58Z")

</div>

Hi @upbeat-demise,

Thanks for reaching out! Unfortunately there is no public support for the STM32MP family in `meta-mender-community` on the `scarthgap` release yet, and the existing `kirkstone` integration is definitely not compatible. Plus, it has its own issues, sadly.

So the most sensible way forward is to take the existing layer on `kirkstone`, fix ist and then forward port. I’ll help as much as I can with that if you can provide errors or details on where things go wrong, but as I don’t have the hardware testing would be on your side. Once its build is stabilized, I can add it to automated build testing, on either or both releases.

Greetz,  
Josef

---

<div class="post-metadata">

**Author:** ![upbeat-demise](https://avatars.discourse-cdn.com/v4/letter/u/e495f1/32.png) [@upbeat-demise](https://hub.mender.io/u/upbeat-demise)\
**Post date:** [February 25, 2025, 3:18pm UTC](https://hub.mender.io/t/mender-integration-for-stm32mp135f/7428/5 "2025-02-25T15:18:20Z")

</div>

Ok thank you for your fast reply!  
I will thinking about fixing it/report build error if I decide to use Mender for software linux updates.