# Mender-configure-\\xe2\\x80\\xa6ply-device-config.service could not be found

**URL:** <https://hub.mender.io/t/mender-configure-xe2-x80-xa6ply-device-config-service-could-not-be-found/3853>\
**Category:** Yocto Project\
**Created:** [July 9, 2021, 2:08am UTC](https://hub.mender.io/t/mender-configure-xe2-x80-xa6ply-device-config-service-could-not-be-found/3853 "2021-07-09T02:08:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![marizonne.villafranc](https://avatars.discourse-cdn.com/v4/letter/m/ad7895/32.png) [@marizonne.villafranc](https://hub.mender.io/u/marizonne.villafranc)\
**Post date:** [July 9, 2021, 2:08am UTC](https://hub.mender.io/t/mender-configure-xe2-x80-xa6ply-device-config-service-could-not-be-found/3853/1 "2021-07-09T02:08:44Z")

</div>

Hi,

How to fix this?

Invalid unit name “mender-configure-…ply-device-config.service” was escaped as  
“mender-configure-\xe2\x80\xa6ply-device-config.service” (maybe you should use  
systemd-escape?)  
Unit mender-configure-\xe2\x80\xa6ply-device-config.service could not be found.

I’m using the meta-mender-demo. Is there anything to be done?

---

<div class="post-metadata">

**Author:** ![dellgreen](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/dellgreen/32/85_2.png) [@dellgreen](https://hub.mender.io/u/dellgreen)\
**Post date:** [July 9, 2021, 7:35am UTC](https://hub.mender.io/t/mender-configure-xe2-x80-xa6ply-device-config-service-could-not-be-found/3853/2 "2021-07-09T07:35:32Z")

</div>

I would start by investigating at what point in the yocto build the file is being renamed with non-ascii characters in the name.