# Issue with Variscite VAR-SOM-MX8M-NANO

**URL:** <https://hub.mender.io/t/issue-with-variscite-var-som-mx8m-nano/2840>\
**Category:** General Discussions\
**Created:** [November 5, 2020, 4:42pm UTC](https://hub.mender.io/t/issue-with-variscite-var-som-mx8m-nano/2840 "2020-11-05T16:42:26Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![bikumar](https://avatars.discourse-cdn.com/v4/letter/b/c89c15/32.png) [@bikumar](https://hub.mender.io/u/bikumar)\
**Post date:** [February 20, 2022, 6:17pm UTC](https://hub.mender.io/t/issue-with-variscite-var-som-mx8m-nano/2840/16 "2022-02-20T18:17:26Z")

</div>

I have been working on an urgent project with imx8mnano Variscite board and needed some help with integration of Mender.  
What I have tried is the steps that are mentioned in the integration for imx8mn [Variscite VAR-SOM-MX8M-NANO : NXP i.MX 8M Nano](https://hub.mender.io/t/variscite-var-som-mx8m-nano-nxp-i-mx-8m-nano/1928)

I am using Yocto dunfell version and have the following local.conf.  
However I have not been able to boot from the sdimg file(please see below). I have been trying for more than two weeks now but haven’t been able to boot my board.

My local.conf:

```auto
# This will make sure that our SPL + u-boot.img is embedded in the sdimg at
# a 1kb offset.
MENDER_IMAGE_BOOTLOADER_FILE = "u-boot-spl.bin"
MENDER_IMAGE_BOOTLOADER_BOOTSECTOR_OFFSET = "2"

# Remove the unneeded VFAT boot partition
IMAGE_BOOT_FILES = ""
MENDER_BOOT_PART_SIZE_MB = "0"

# Cleanup image types generated
IMAGE_FSTYPES_remove = "tar.gz ext4 wic.gz wic.bmap multiubi mender.bmap"

# Artifact name
MENDER_ARTIFACT_NAME = "enphase-mender-release-1"

# disable uefi
MENDER_FEATURES_ENABLE_append = " mender-uboot mender-image"
MENDER_FEATURES_DISABLE_append = " mender-grub mender-image-uefi"

# Appended fragment from meta-mender-community/meta-mender-variscite/templates
# SDCard Settings
MENDER_STORAGE_DEVICE_imx8mn-var-som = "/dev/mmcblk1"
MENDER_UBOOT_STORAGE_DEVICE_imx8mn-var-som = "1"
UBOOT_CONFIG_imx8mn-var-som = "sd"
MENDER_FEATURES_ENABLE_append = " mender-image-sd "
MENDER_STORAGE_TOTAL_SIZE_MB = "8192"

```

I have mounted the two roofs partition and can see Linux image is there. Besides from the sdimg file I was also able to dump the bootloader yet it doesn’t boot the board.

---

_[View the full topic](https://hub.mender.io/t/issue-with-variscite-var-som-mx8m-nano/2840)._