# Integration of Mender to reTerminal

**URL:** <https://hub.mender.io/t/integration-of-mender-to-reterminal/4361>\
**Category:** Yocto Project\
**Tags:** yocto, raspberrypi-cm4\
**Created:** [December 1, 2021, 6:24am UTC](https://hub.mender.io/t/integration-of-mender-to-reterminal/4361 "2021-12-01T06:24:31Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![jepr](https://avatars.discourse-cdn.com/v4/letter/j/bcef8e/32.png) [@jepr](https://hub.mender.io/u/jepr)\
**Post date:** [August 17, 2022, 2:26pm UTC](https://hub.mender.io/t/integration-of-mender-to-reterminal/4361/3 "2022-08-17T14:26:19Z")

</div>

HI, I added the misssing _`setuptools3-base.bbclass`_ from the head version of poky. after this I ran into an error stating missing bb files for `rpi-bootfiles.bbappend` so I renamed the `bootfiles.bb` in `bootfiles.bbappend` in `meta-seed` in order for them to be compatibles. Unfortuntely I now run into an error

```auto
ERROR: Nothing RPROVIDES 'linux-firmware-rpidistro-bcm43455' (but /home/jprobst/TUTO_PROPRES/mender-reterminal/layers/poky/meta/recipes-core/packagegroups/packagegroup-base.bb, /home/jprobst/TUTO_PROPRES/mender-reterminal/layers/meta-raspberrypi/recipes-core/packagegroups/packagegroup-rpi-test.bb RDEPENDS on or otherwise requires it)
NOTE: Runtime target 'linux-firmware-rpidistro-bcm43455' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['linux-firmware-rpidistro-bcm43455']
NOTE: Runtime target 'packagegroup-base-extended' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['packagegroup-base-extended', 'linux-firmware-rpidistro-bcm43455']
ERROR: Required build target 'rpi-test-image' has no buildable providers.
Missing or unbuildable dependency chain was: ['rpi-test-image', 'packagegroup-base-extended', 'linux-firmware-rpidistro-bcm43455']

```

One solution I found was cloning `meta-raspberrypi` from kirkstone instead of main in the first steps of your tutorial @lakshanthad and then it compiled but I am now stuck in the boot when I burn the reTerminal with this image so something must be missing… I posted elsewhere giving the bootlogs that I am able to access to via UART: [Stuck in Starting kernel after adding mender to an image for ReTerminal made with Yocto](https://hub.mender.io/t/stuck-in-starting-kernel-after-adding-mender-to-an-image-for-reterminal-made-with-yocto/5082)

---

_[View the full topic](https://hub.mender.io/t/integration-of-mender-to-reterminal/4361)._