# Imx6ull NAND Flash

**URL:** <https://hub.mender.io/t/imx6ull-nand-flash/1451>\
**Category:** General Discussions\
**Tags:** sumo\
**Created:** [January 20, 2020, 11:48am UTC](https://hub.mender.io/t/imx6ull-nand-flash/1451 "2020-01-20T11:48:26Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![drewmoseley](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/drewmoseley/32/47_2.png) [@drewmoseley](https://hub.mender.io/u/drewmoseley)\
**Post date:** [January 20, 2020, 7:22pm UTC](https://hub.mender.io/t/imx6ull-nand-flash/1451/2 "2020-01-20T19:22:46Z")

</div>

Hello @deepanr welcome to Mender Hub. It’s likely going to require some experimentation on your part to enable Mender on the raw-flash system. The parameters needed are going to depend heavily on the specific hardware in use. The best place to start is here: [https://docs.mender.io/2.2/devices/yocto-project/raw-flash](https://docs.mender.io/2.2/devices/yocto-project/raw-flash).

You can also see [Toradex Colibri iMX7 Dual 512MB / Colibri iMX7 Solo 256MB](https://hub.mender.io/t/toradex-colibri-imx7-dual-512mb-colibri-imx7-solo-256mb/81) which is an existing i.MX7 port to a Toradex board using raw flash.

If you post specific issues and details of your hardware we may be able to guide you further.  
Drew

---

_[View the full topic](https://hub.mender.io/t/imx6ull-nand-flash/1451)._