# How to configure networking using systemd in Yocto Project

**URL:** <https://hub.mender.io/t/how-to-configure-networking-using-systemd-in-yocto-project/1097>\
**Category:** Yocto Project\
**Created:** [October 3, 2019, 2:52pm UTC](https://hub.mender.io/t/how-to-configure-networking-using-systemd-in-yocto-project/1097 "2019-10-03T14:52:00Z")\
**Posts on this page:** 1\
**Showing post:** 17

<div class="post-metadata">

**Author:** ![drewmoseley](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/drewmoseley/32/47_2.png) [@drewmoseley](https://hub.mender.io/u/drewmoseley)\
**Post date:** [March 19, 2020, 3:16pm UTC](https://hub.mender.io/t/how-to-configure-networking-using-systemd-in-yocto-project/1097/17 "2020-03-19T15:16:27Z")

</div>

OK. That means there is no network interface with a proper driver and firmware. Did you follow the [instructions from here](https://hub.mender.io/t/dart-mx8m-nxp-i-mx8m/1470) for the build? I think if you make sure the DISTRO is set to fslc-xwayland then all the appropriate bits will be installed.

Drew

---

_[View the full topic](https://hub.mender.io/t/how-to-configure-networking-using-systemd-in-yocto-project/1097)._