# How to adjust Mender disk image artifact **URL:** \ **Category:** General Discussions\ **Created:** [May 16, 2019, 8:00am UTC](https://hub.mender.io/t/how-to-adjust-mender-disk-image-artifact/574 "2019-05-16T08:00:51Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![mirzak](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mirzak/32/2056_2.png) [@mirzak](https://hub.mender.io/u/mirzak)\ **Post date:** [May 16, 2019, 9:09am UTC](https://hub.mender.io/t/how-to-adjust-mender-disk-image-artifact/574/6 "2019-05-16T09:09:44Z")
Similar problem was discussed and resolved here, > [@How to set new partition size with mender-convert](https://hub.mender.io/t/how-to-set-new-partition-size-with-mender-convert/399): > > OK! I completed the “Convert the Raspberry Pi disk image to support Mender” section, flashed the .sdimg file to a SD disk, booted it on the Pi, the Mender daemon is running and I was able to authorize the device in hosted Mender. +1 Next I tried creating my “golden image”. I flashed 2018-11-13-raspbian-stretch-lite.img to a second SD card, booted it on the Pi, and made a change to the filesystem (I created a file “two” in the /home/pi directory as a marker). I then copied the SD card on m… --- _[View the full topic](https://hub.mender.io/t/how-to-adjust-mender-disk-image-artifact/574)._