# File system update after mender install on Yocto. It still boots with old file system

**URL:** <https://hub.mender.io/t/file-system-update-after-mender-install-on-yocto-it-still-boots-with-old-file-system/5900>\
**Category:** General Discussions\
**Tags:** yocto, imx8, qt, toradex, apalis\
**Created:** [June 7, 2023, 8:23am UTC](https://hub.mender.io/t/file-system-update-after-mender-install-on-yocto-it-still-boots-with-old-file-system/5900 "2023-06-07T08:23:55Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![drewmoseley](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/drewmoseley/32/47_2.png) [@drewmoseley](https://hub.mender.io/u/drewmoseley)\
**Post date:** [June 8, 2023, 1:41pm UTC](https://hub.mender.io/t/file-system-update-after-mender-install-on-yocto-it-still-boots-with-old-file-system/5900/6 "2023-06-08T13:41:27Z")

</div>

Well it uses [distro\_bootcmd](https://developer.toradex.com/linux-bsp/os-development/boot/distro-boot/) which is expected. Since you are using boot2qt I’m assuming you didn’t use the same steps as [documented here](https://hub.mender.io/t/toradex-apalis-i-mx8/4103) to get your sources right? Can you share the details of how you got the full set of sources?

Drew

---

_[View the full topic](https://hub.mender.io/t/file-system-update-after-mender-install-on-yocto-it-still-boots-with-old-file-system/5900)._