# Ethernet module not available after deployment **URL:** \ **Category:** General Discussions\ **Tags:** mender-convert\ **Created:** [August 28, 2019, 3:43pm UTC](https://hub.mender.io/t/ethernet-module-not-available-after-deployment/968 "2019-08-28T15:43:05Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![mirzak](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mirzak/32/2056_2.png) [@mirzak](https://hub.mender.io/u/mirzak)\ **Post date:** [August 28, 2019, 5:33pm UTC](https://hub.mender.io/t/ethernet-module-not-available-after-deployment/968/3 "2019-08-28T17:33:03Z")
> we burn the image on the sd card and then run a deployment (with the created mender-artifact) it is working as expected. When we deploy the new mender-artifact to the old image after rebooting… This probably relates to the boot firmware files not being updated, check the “Boot Firmware files” section under “Known Issues”, > [@Raspberry Pi 3 Model B/B+ Raspbian](https://hub.mender.io/t/raspberry-pi-3-model-b-b-raspbian/140#footnote_boot_files): > > Board description The Raspberry Pi 3 Model B/B+ is a popular single board computer based on Broadcom SoCs. It is the most powerful board within the Raspberry Pi family and probably the most popular with “makers”. [770A5842-462x322] URL: [https://www.raspberrypi.org/products/raspberry-pi-3-model-b-plus](https://www.raspberrypi.org/products/raspberry-pi-3-model-b-plus?target=_blank) URL: [https://www.raspberrypi.org/products/raspberry-pi-3-model-b](https://www.raspberrypi.org/products/raspberry-pi-3-model-b?target=_blank) Wiki: [https://elinux.org/RPi\_Hub](https://elinux.org/RPi_Hub?target=_blank)Test results The Raspberry Pi OS releases in the table below have been tested by the Mender c… --- _[View the full topic](https://hub.mender.io/t/ethernet-module-not-available-after-deployment/968)._