# Error: nothing provides kernel-devicetree needed by packagegroup-core-boot when integrating Mender
**URL:** https://hub.mender.io/t/error-nothing-provides-kernel-devicetree-needed-by-packagegroup-core-boot-when-integrating-mender/7482
**Category:** General Discussions
**Tags:** yocto, kirkstone
**Created:** [January 23, 2025, 2:08pm UTC](https://hub.mender.io/t/error-nothing-provides-kernel-devicetree-needed-by-packagegroup-core-boot-when-integrating-mender/7482 "2025-01-23T14:08:59Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@Jay](https://hub.mender.io/u/Jay)
#### Post date: [January 23, 2025, 2:08pm UTC](https://hub.mender.io/t/error-nothing-provides-kernel-devicetree-needed-by-packagegroup-core-boot-when-integrating-mender/7482/1 "2025-01-23T14:08:59Z")
I am trying to integrate Mender OTA updates into my Yocto build. However, I am encountering the following error during the build process:
ERROR: Nothing provides kernel-devicetree needed by packagegroup-core-boot-1.0-r17.0.0.sa8155
I am new to Yocto and Mender, so I am not sure how to resolve this issue. Below are my configurations and steps I have taken so far.
# Mender Storage Configuration
MENDER\_STORAGE\_DEVICE = “/dev/sda”
MENDER\_STORAGE\_TOTAL\_SIZE\_MB = “137216”
MENDER\_BOOT\_PART\_SIZE\_MB = “64”
MENDER\_DATA\_PART\_SIZE\_MB = “131072”
MENDER\_IMAGE\_ROOTFS\_SIZE\_MB = “3020”
# Bootloader (EDK2)
MENDER\_FEATURES\_ENABLE:append = " mender-image"
MENDER\_FEATURES\_DISABLE:append = " mender-grub mender-uboot"
# Artifact Configuration
MENDER\_ARTIFACT\_NAME = “release-1”
Any help would be appreciated. Thanks
---
### Author:  [@leonardo-k](https://hub.mender.io/u/leonardo-k)
#### Post date: [February 4, 2025, 7:32am UTC](https://hub.mender.io/t/error-nothing-provides-kernel-devicetree-needed-by-packagegroup-core-boot-when-integrating-mender/7482/2 "2025-02-04T07:32:06Z")
Hi @Jay
Are you sure it is a mender issue? can you share more details?