# Deployment stuck on "Queued to start"

**URL:** <https://hub.mender.io/t/deployment-stuck-on-queued-to-start/6713>\
**Category:** General Discussions\
**Created:** [April 7, 2024, 5:13am UTC](https://hub.mender.io/t/deployment-stuck-on-queued-to-start/6713 "2024-04-07T05:13:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![AbhinavMir](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/abhinavmir/32/2152_2.png) [@AbhinavMir](https://hub.mender.io/u/AbhinavMir)\
**Post date:** [April 7, 2024, 5:13am UTC](https://hub.mender.io/t/deployment-stuck-on-queued-to-start/6713/1 "2024-04-07T05:13:44Z")

</div>

I have a Jetson tegra that I setup with A/B, and then I created an artifact of the rootfs, exported it as a rootfs tarball, converted it to a ext4 and then generated an artifact (following [Nvidia Jetson L4T Integration](https://hub.mender.io/t/nvidia-jetson-l4t-integration/3968), but using my own custom rootfs tarball). I connected my target device to host mender, uploaded the mender artifact, created a deployment and pushed it, but it gets stuck on "“Queued to start”. How can I get this through for all devices?

Cheers.

---

<div class="post-metadata">

**Author:** ![AbhinavMir](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/abhinavmir/32/2152_2.png) [@AbhinavMir](https://hub.mender.io/u/AbhinavMir)\
**Post date:** [April 7, 2024, 5:23am UTC](https://hub.mender.io/t/deployment-stuck-on-queued-to-start/6713/2 "2024-04-07T05:23:26Z")

</div>

Now it shows “skipped”, but when I open details, it says “successfully updated X devices”. Not sure what’s happening.

---

<div class="post-metadata">

**Author:** ![AbhinavMir](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/abhinavmir/32/2152_2.png) [@AbhinavMir](https://hub.mender.io/u/AbhinavMir)\
**Post date:** [April 7, 2024, 4:22pm UTC](https://hub.mender.io/t/deployment-stuck-on-queued-to-start/6713/3 "2024-04-07T16:22:39Z")

</div>

Single application updates go through, so not a polling issue.

---

<div class="post-metadata">

**Author:** ![lramirez](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/lramirez/32/1195_2.png) [@lramirez](https://hub.mender.io/u/lramirez)\
**Post date:** [April 18, 2024, 10:26am UTC](https://hub.mender.io/t/deployment-stuck-on-queued-to-start/6713/4 "2024-04-18T10:26:29Z")

</div>

Hello @AbhinavMir,

This message means the device already has that artifact already installed. I wonder if it succeed once and now Mender is rejecting them as the device reports it already contains it installed. Is this not the case? Maybe you can check with `mender show-provides` to print a list of artifacts already installed in the device.

Luis