# Deployment of Ubuntu Server 16.04 on Raspberry Pi 3 B+ **URL:** \ **Category:** General Discussions\ **Created:** [September 10, 2019, 1:27pm UTC](https://hub.mender.io/t/deployment-of-ubuntu-server-16-04-on-raspberry-pi-3-b/998 "2019-09-10T13:27:19Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![mirzak](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mirzak/32/2056_2.png) [@mirzak](https://hub.mender.io/u/mirzak)\ **Post date:** [September 10, 2019, 1:49pm UTC](https://hub.mender.io/t/deployment-of-ubuntu-server-16-04-on-raspberry-pi-3-b/998/2 "2019-09-10T13:49:12Z")
I believe this is the same problem reported in a different thread (see my comments there), > [@Issue about mender-convert from 2 different input image](https://hub.mender.io/t/issue-about-mender-convert-from-2-different-input-image/957): > > As we known, mender-convert can be used to convert existing disk images for use with Mender. For more info, pls see: [https://docs.mender.io/2.0/artifacts/debian-family](https://docs.mender.io/2.0/artifacts/debian-family) And the code is: git clone -b 1.1.1 [https://github.com/mendersoftware/mender-convert.git](https://github.com/mendersoftware/mender-convert.git) Here we use the following mender-convert cmd to generate the mender image: DEVICE\_TYPE="raspberrypi3" # RAW\_DISK\_IMAGE="input/2019-04-09-raspbian-stretch-lite.img " RAW\_DISK\_IMAGE="input/ubuntu-18.04.2-preinstalled-server-arm64+raspi3.img"… --- _[View the full topic](https://hub.mender.io/t/deployment-of-ubuntu-server-16-04-on-raspberry-pi-3-b/998)._