# Creating atrifact -Convert a raw disk image problem

**URL:** <https://hub.mender.io/t/creating-atrifact-convert-a-raw-disk-image-problem/582>\
**Category:** General Discussions\
**Created:** [May 17, 2019, 5:21am UTC](https://hub.mender.io/t/creating-atrifact-convert-a-raw-disk-image-problem/582 "2019-05-17T05:21:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gpram](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@gpram](https://hub.mender.io/u/gpram)\
**Post date:** [May 17, 2019, 5:21am UTC](https://hub.mender.io/t/creating-atrifact-convert-a-raw-disk-image-problem/582/1 "2019-05-17T05:21:38Z")

</div>

command :  
./docker-mender-convert from-raw-disk-image  
–raw-disk-image $RAW\_DISK\_IMAGE  
–mender-disk-image $MENDER\_DISK\_IMAGE  
–device-type $DEVICE\_TYPE  
–artifact-name $ARTIFACT\_NAME  
–bootloader-toolchain arm-buildroot-linux-gnueabihf  
–demo  
–demo-host-ip $DEMO\_HOST\_IP

log file

1/9 re-partitioning raw disk image…  
detected raw disk image with 1 partition(s).  
adjust Mender disk image size to the total storage size(8000mb)  
Defined total storage size of MB is too small  
Minimal required storage is 30532MB. aborting

---

<div class="post-metadata">

**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\
**Post date:** [May 17, 2019, 6:06am UTC](https://hub.mender.io/t/creating-atrifact-convert-a-raw-disk-image-problem/582/2 "2019-05-17T06:06:20Z")

</div>

Please do not create new topics as same question was asked in [here](https://hub.mender.io/t/how-to-adjust-mender-disk-image-artifact/574/21)