# Create an SD image from working BeagleBone

**URL:** <https://hub.mender.io/t/create-an-sd-image-from-working-beaglebone/5098>\
**Category:** General Discussions\
**Tags:** beaglebone-black\
**Created:** [July 7, 2022, 8:54pm UTC](https://hub.mender.io/t/create-an-sd-image-from-working-beaglebone/5098 "2022-07-07T20:54:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![gar1116](https://avatars.discourse-cdn.com/v4/letter/g/df705f/32.png) [@gar1116](https://hub.mender.io/u/gar1116)\
**Post date:** [July 7, 2022, 8:54pm UTC](https://hub.mender.io/t/create-an-sd-image-from-working-beaglebone/5098/1 "2022-07-07T20:54:08Z")

</div>

Hello,  
I have an ‘updated’ BeagleBone with Mender that I want to clone. When I use `beaglebone-black-make-microSD-flasher-from-eMMC` to make an SD card, and burn that on another BBB, the Mender functionality goes away (I can’t access Mender from my ‘new’ BBB).  
Am I going about this right? Whay do I need to do to make an image I can move to another BBB?

Thanks  
George R