# Connect: network is unreachable

**URL:** <https://hub.mender.io/t/connect-network-is-unreachable/1034>\
**Category:** General Discussions\
**Tags:** raspberry-pi-3\
**Created:** [September 18, 2019, 8:37am UTC](https://hub.mender.io/t/connect-network-is-unreachable/1034 "2019-09-18T08:37:17Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![samlam](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@samlam](https://hub.mender.io/u/samlam)\
**Post date:** [November 1, 2019, 3:30am UTC](https://hub.mender.io/t/connect-network-is-unreachable/1034/10 "2019-11-01T03:30:12Z")

</div>

Here is log of u-boot. The “bad CRC” occurs since i flash the .sdimg into the SD card, and i tried remove “resize.sh” before first boot from this [thread](https://hub.mender.io/t/raspberry-pi-stuck-in-u-boot/554) and it doesn’t help.

> U-Boot 2018.07-g884893e54a (Oct 31 2019 - 07:37:13 +0000)
> 
> DRAM: 948 MiB  
> RPI Compute Module 3 (0xa220a0)  
> MMC: mmc@7e202000: 0, sdhci@7e300000: 1  
> Loading Environment from FAT… \*\*\* Warning - bad CRC, using default environment
> 
> Failed (-5)  
> Loading Environment from MMC… OK  
> In: serial  
> Out: serial  
> Err: serial  
> Net: No ethernet found.  
> Saving Environment to MMC… Writing to redundant MMC(0)… OK  
> Hit any key to stop autoboot: 2 1 0  
> switch to partitions #0, OK  
> mmc0 is current device  
> Scanning mmc 0:1…  
> Found U-Boot script /boot.scr  
> 466 bytes read in 1 ms (455.1 KiB/s)  
> Executing script at 02400000  
> switch to partitions #0, OK  
> mmc0 is current device  
> 5310624 bytes read in 225 ms (22.5 MiB/s)  
> Kernel image @ 0x080000 [0x000000 - 0x5108a0]

---

_[View the full topic](https://hub.mender.io/t/connect-network-is-unreachable/1034)._