# Colibri IMX6ULL

**URL:** <https://hub.mender.io/t/colibri-imx6ull/2911>\
**Category:** General Discussions\
**Tags:** nxp, dunfell, colibri-imx6ull, toradex\
**Created:** [November 30, 2020, 10:48pm UTC](https://hub.mender.io/t/colibri-imx6ull/2911 "2020-11-30T22:48:14Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![thofu](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/thofu/32/914_2.png) [@thofu](https://hub.mender.io/u/thofu)\
**Post date:** [December 1, 2020, 5:13am UTC](https://hub.mender.io/t/colibri-imx6ull/2911/2 "2020-12-01T05:13:51Z")

</div>

Hi.  
I had the same problem and answered in the following thread: [Ubifs ECC errors after adding Mender to Toradex iMX6ULL Image](https://hub.mender.io/t/ubifs-ecc-errors-after-adding-mender-to-toradex-imx6ull-image/1767/5).

In short: Try `nand write.trimffs` instead of `nand write` to flash the device.

---

_[View the full topic](https://hub.mender.io/t/colibri-imx6ull/2911)._