# CL200 series x86\_64 mender convertion **URL:** \ **Category:** General Discussions\ **Created:** [September 25, 2020, 5:45am UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490 "2020-09-25T05:45:33Z")\ **Posts on this page:** 12\ **Page:** 2
**Author:** ![mikhailtchernychev](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mikhailtchernychev/32/1023_2.png) [@mikhailtchernychev](https://hub.mender.io/u/mikhailtchernychev)\ **Post date:** [October 1, 2020, 1:31pm UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/23 "2020-10-01T13:31:35Z")
Conversion did not create log. But I see how to enable it and run it again. ---
**Author:** ![mikhailtchernychev](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mikhailtchernychev/32/1023_2.png) [@mikhailtchernychev](https://hub.mender.io/u/mikhailtchernychev)\ **Post date:** [October 1, 2020, 2:48pm UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/24 "2020-10-01T14:48:45Z")
This part of console log seem shows this problem ```auto MENDER_ARTIFACT_NAME=u20 ./docker-mender-convert --disk-image input/cl200_u20.img --config configs/cl200_x86-64_hdd_config --overlay ./rootfs_overlay_demo Running mender-convert --disk-image input/cl200_u20.img --config configs/cl200_x86-64_hdd_config --overlay ./rootfs_overlay_demo Running mender-convert-extract: --disk-image input/cl200_u20.img --config configs/cl200_x86-64_hdd_config --overlay ./rootfs_overlay_demo 2020-10-01 14:11:52 [INFO] [mender-convert-extract] Using configuration file: configs/mender_convert_config 2020-10-01 14:11:52 [INFO] [mender-convert-extract] Using configuration file: configs/cl200_x86-64_hdd_config 2020-10-01 14:11:52 [INFO] [mender-convert-extract] Validating disk image 2020-10-01 14:11:52 [INFO] [mender-convert-extract] Disk parsed successfully 2020-10-01 14:11:52 [INFO] [mender-convert-extract] NUMBER OF PARTS: 2 TYPE: gpt 2020-10-01 14:11:52 [INFO] [mender-convert-extract] PART 1: SIZE: 512M TYPE: c12a7328-f81f-11d2-ba4b-00a0c93ec93b 2020-10-01 14:11:52 [INFO] [mender-convert-extract] PART 1: extracting to work/part-1.fs 2020-10-01 14:12:22 [INFO] [mender-convert-extract] PART 2: SIZE: 6G TYPE: 0fc63daf-8483-4772-8e79-3d69d8477de4 2020-10-01 14:12:22 [INFO] [mender-convert-extract] PART 2: extracting to work/part-2.fs Running mender-convert-modify: --disk-image input/cl200_u20.img --config configs/cl200_x86-64_hdd_config --overlay ./rootfs_overlay_demo 2020-10-01 14:16:44 [INFO] [mender-convert-modify] Using configuration file: configs/mender_convert_config 2020-10-01 14:16:44 [INFO] [mender-convert-modify] Using configuration file: configs/cl200_x86-64_hdd_config 2020-10-01 14:16:44 [INFO] [mender-convert-modify] Installing Mender client and related files 2020-10-01 14:16:47 [INFO] [mender-convert-modify] Found Linux kernel image: work/rootfs/boot/vmlinuz.old work/rootfs/boot/vmlinuz-5.4.0-48-generic work/rootfs/boot/vmlinuz basename: extra operand 'work/rootfs/boot/vmlinuz' Try 'basename --help' for more information. 2020-10-01 14:16:47 [INFO] [mender-convert-modify] Found initramfs image: work/rootfs/boot/initrd.img-5.4.0-48-generic work/rootfs/boot/initrd.img.old work/rootfs/boot/initrd.img basename: extra operand 'work/rootfs/boot/initrd.img' Try 'basename --help' for more information. 2020-10-01 14:16:47 [INFO] [mender-convert-modify] Installing GRUB 2020-10-01 14:16:47 [INFO] [mender-convert-modify] GRUB EFI: grubx64.efi - PATH: EFI/ubuntu 2020-10-01 14:16:48 [INFO] [mender-convert-modify] Installing a custom /etc/fstab (see work/convert.log for more info) 2020-10-01 14:16:48 [INFO] [mender-convert-modify] Performing platform specific modifications (if any) 2020-10-01 14:16:48 [INFO] [mender-convert-modify] Running hook: platform_modify 2020-10-01 14:16:48 [INFO] [mender-convert-modify] Performing user/local specific modifications (if any) 2020-10-01 14:16:48 [INFO] [mender-convert-modify] Running hook: user_local_modify 2020-10-01 14:16:48 [INFO] [mender-convert-modify] Applying rootfs overlay: ./rootfs_overlay_demo mender-convert-modify has finished. Cleaning up... Running mender-convert-package: --disk-image input/cl200_u20.img --config configs/cl200_x86-64_hdd_config --overlay ./rootfs_overlay_demo 2020-10-01 14:16:49 [INFO] [mender-convert-package] Using configuration file: configs/mender_convert_config 2020-10-01 14:16:49 [INFO] [mender-convert-package] Using configuration file: configs/cl200_x86-64_hdd_config 2020-10-01 14:16:50 [WARN] [mender-convert-package] The allocated boot part size 40 MiB is too small. 2020-10-01 14:16:50 [WARN] [mender-convert-package] The actual boot part size is 512 MiB 2020-10-01 14:16:50 [WARN] [mender-convert-package] Will adjust MENDER_BOOT_PART_SIZE_MB automatically 2020-10-01 14:16:50 [WARN] [mender-convert-package] Consider adjusting the configuration file to avoid this message 2020-10-01 14:17:06 [INFO] [mender-convert-package] Rootfs filesystem size will be 3479 MiB 2020-10-01 14:17:06 [INFO] [mender-convert-package] Creating a file-system image from: work/rootfs/data/ 2020-10-01 14:17:08 [INFO] [mender-convert-package] Creating a file-system image from: work/rootfs/ 2020-10-01 14:21:12 [INFO] [mender-convert-package] Copying root filesystem image to deploy directory 2020-10-01 14:24:08 [INFO] [mender-convert-package] Writing Mender artifact to: deploy/cl200_u20-x86_64-mender.mender 2020-10-01 14:24:08 [INFO] [mender-convert-package] This can take up to 20 minutes depending on which compression method is used 2020-10-01 14:29:13 [INFO] [mender-convert-package] Creating Mender compatible disk-image 2020-10-01 14:29:13 [INFO] [mender-convert-package] Total disk size: 16000 MiB 2020-10-01 14:29:13 [INFO] [mender-convert-package] Boot partition 512 MiB 2020-10-01 14:29:13 [INFO] [mender-convert-package] RootFS partitions 7664 MiB x 2 2020-10-01 14:29:13 [INFO] [mender-convert-package] Data partition 128 MiB 2020-10-01 14:29:13 [INFO] [mender-convert-package] Using input diskimage partition scheme (gpt) 2020-10-01 14:29:13 [INFO] [mender-convert-package] Writing GPT partition table 2020-10-01 14:29:14 [INFO] [mender-convert-package] Writing boot partition image 2020-10-01 14:30:56 [INFO] [mender-convert-package] Writing rootfsa partition image 2020-10-01 14:40:17 [INFO] [mender-convert-package] Writing rootfsb partition image ... ``` Full log ```auto 2020-10-01 14:11:52 [DEBUG] [mender-convert-extract] Running: dd if=input/cl200_u20.img of=work/part-1.fs skip=2048 bs=512 count=1048576 conv=sparse status=none 2020-10-01 14:11:52 [DEBUG] [mender-convert-extract] Run result: 2020-10-01 14:12:22 [DEBUG] [mender-convert-extract] 2020-10-01 14:12:22 [DEBUG] [mender-convert-extract] Running: dd if=input/cl200_u20.img of=work/part-2.fs skip=1050624 bs=512 count=12582912 conv=sparse status=none 2020-10-01 14:12:22 [DEBUG] [mender-convert-extract] Run result: 2020-10-01 14:16:44 [DEBUG] [mender-convert-extract] 2020-10-01 14:16:44 [DEBUG] [mender-convert-modify] Running: wget -Nq https://d1b0l86ne08fsf.cloudfront.net/master/dist-packages/debian/amd64/mender-client_master-1_amd64.deb -P work/mender-deb 2020-10-01 14:16:44 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:45 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:45 [DEBUG] [mender-convert-modify] Running: ar -xv mender-client_master-1_amd64.deb 2020-10-01 14:16:45 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:45 [DEBUG] [mender-convert-modify] x - debian-binary x - control.tar.gz x - data.tar.xz 2020-10-01 14:16:45 [DEBUG] [mender-convert-modify] Running: tar xJf data.tar.xz -C files 2020-10-01 14:16:45 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:45 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:45 [DEBUG] [mender-convert-modify] Running: sudo rsync --archive --keep-dirlinks --verbose work/mender-deb/files/ work/rootfs/ 2020-10-01 14:16:45 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:46 [DEBUG] [mender-convert-modify] sending incremental file list ./ etc/ etc/mender/ etc/mender/artifact_info lib/ lib/systemd/ lib/systemd/system/ lib/systemd/system/mender-client.service usr/ usr/bin/ usr/bin/mender usr/share/ usr/share/doc/ usr/share/doc/mender-client/ usr/share/doc/mender-client/changelog.Debian.gz usr/share/doc/mender-client/copyright usr/share/doc/mender-client/examples/ usr/share/doc/mender-client/examples/demo.crt usr/share/doc/mender/ usr/share/mender/ usr/share/mender/identity/ usr/share/mender/identity/mender-device-identity usr/share/mender/inventory/ usr/share/mender/inventory/mender-inventory-bootloader-integration usr/share/mender/inventory/mender-inventory-geo usr/share/mender/inventory/mender-inventory-hostinfo usr/share/mender/inventory/mender-inventory-network usr/share/mender/inventory/mender-inventory-os usr/share/mender/inventory/mender-inventory-rootfs-type usr/share/mender/modules/ usr/share/mender/modules/v3/ usr/share/mender/modules/v3/deb usr/share/mender/modules/v3/directory usr/share/mender/modules/v3/docker usr/share/mender/modules/v3/rpm usr/share/mender/modules/v3/script usr/share/mender/modules/v3/single-file sent 7,829,348 bytes received 456 bytes 5,219,869.33 bytes/sec total size is 7,825,804 speedup is 1.00 2020-10-01 14:16:46 [DEBUG] [mender-convert-modify] Running: sudo ln -sf /lib/systemd/system/mender-client.service work/rootfs/etc/systemd/system/multi-user.target.wants/mender-client.service 2020-10-01 14:16:46 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:46 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:46 [DEBUG] [mender-convert-modify] Running: wget -Nq 'https://github.com/mendersoftware/grub-mender-grubenv/archive/1.3.0.tar.gz' -P work/ 2020-10-01 14:16:46 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Running: tar xzvf work/1.3.0.tar.gz -C work/ 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] grub-mender-grubenv-1.3.0/ grub-mender-grubenv-1.3.0/.gitignore grub-mender-grubenv-1.3.0/01_console_bootargs_grub.cfg grub-mender-grubenv-1.3.0/05_mender_setup_grub.cfg grub-mender-grubenv-1.3.0/10_bootargs_grub.cfg grub-mender-grubenv-1.3.0/90_mender_boot_grub.cfg grub-mender-grubenv-1.3.0/95_mender_try_to_recover_grub.cfg grub-mender-grubenv-1.3.0/LICENSE grub-mender-grubenv-1.3.0/Makefile grub-mender-grubenv-1.3.0/README.md grub-mender-grubenv-1.3.0/blank_grubenv grub-mender-grubenv-1.3.0/fw_printenv grub-mender-grubenv-1.3.0/make-env-and-lock-files grub-mender-grubenv-1.3.0/mender_grubenv_defines.example 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Running: make 2>&1 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] rm -rf tmp-workdir mkdir -p tmp-workdir cp -f ./05_mender_setup_grub.cfg ./01_console_bootargs_grub.cfg ./95_mender_try_to_recover_grub.cfg ./10_bootargs_grub.cfg ./90_mender_boot_grub.cfg tmp-workdir cp -f mender_grubenv_defines tmp-workdir/00_mender_grubenv_defines_grub.cfg cd tmp-workdir && for script in [0-9][0-9]_*_grub.cfg; do \ echo "# Start of ---------- `basename $script` ----------"; \ cat $script; \ echo "# End of ---------- `basename $script` ----------"; \ done > mender_grub.cfg mv tmp-workdir/mender_grub.cfg . rm -rf tmp-workdir echo "ENV_DIR = /boot/efi/EFI/BOOT" > mender_grubenv.config ./make-env-and-lock-files + BLANKENV=./blank_grubenv ++ sed -ne '/^mender_rootfsa_part=/ {s/^mender_rootfsa_part=//; p}' mender_grubenv_defines + PART_NUMBER=2 + mkdir -p mender_grubenv + cp ./blank_grubenv mender_grubenv/env ++ grep '^######' -b mender_grubenv/env ++ egrep -o '^[0-9]+' + offset=25 + dd of=mender_grubenv/env bs=25 seek=1 conv=notrunc 2+1 records in 2+1 records out 51 bytes copied, 0.00028641 s, 178 kB/s + cp ./blank_grubenv mender_grubenv/lock ++ grep '^######' -b mender_grubenv/lock ++ egrep -o '^[0-9]+' + offset=25 + dd of=mender_grubenv/lock bs=25 seek=1 conv=notrunc 0+1 records in 0+1 records out 10 bytes copied, 8.7895e-05 s, 114 kB/s + cd mender_grubenv + sha256sum lock 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Running: sudo make DESTDIR=../ BOOT_DIR=boot install-boot-files 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] install -d -m 755 ../boot/EFI/BOOT install -m 644 mender_grub.cfg ../boot/EFI/BOOT/grub.cfg install -m 755 -d ../boot/EFI/BOOT/mender_grubenv1 install -m 644 mender_grubenv/env ../boot/EFI/BOOT/mender_grubenv1/env install -m 644 mender_grubenv/lock ../boot/EFI/BOOT/mender_grubenv1/lock install -m 644 mender_grubenv/lock.sha256sum ../boot/EFI/BOOT/mender_grubenv1/lock.sha256sum install -m 755 -d ../boot/EFI/BOOT/mender_grubenv2 install -m 644 mender_grubenv/env ../boot/EFI/BOOT/mender_grubenv2/env install -m 644 mender_grubenv/lock ../boot/EFI/BOOT/mender_grubenv2/lock install -m 644 mender_grubenv/lock.sha256sum ../boot/EFI/BOOT/mender_grubenv2/lock.sha256sum 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Running: sudo make DESTDIR=../rootfs install-tools 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] install -d -m 755 ../rootfs/usr/bin install -m 755 ./fw_printenv ../rootfs/usr/bin ln -sf fw_printenv ../rootfs/usr/bin/fw_setenv install -d -m 755 ../rootfs/etc install -m 755 mender_grubenv.config ../rootfs/etc 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Running: wget -Nq https://d1b0l86ne08fsf.cloudfront.net/mender-convert/grub-efi/2.04/x86-64/grub-efi-bootx64.efi -P work/ 2020-10-01 14:16:47 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: wget -Nq https://d1b0l86ne08fsf.cloudfront.net/mender-convert/grub-efi/2.04/x86-64/grub-editenv -P work/ 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo install -m 751 work/grub-editenv work/rootfs/usr/bin/ 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo mkdir -p work/boot/EFI/ubuntu 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo cp work/grub-efi-bootx64.efi -P work/boot/EFI/ubuntu/grubx64.efi 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo mkdir -p work/rootfs/data/mender 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo ln -sf /data/mender work/rootfs/var/lib/mender 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo cp work/mender.conf.data work/rootfs/data/mender/mender.conf 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: echo 'device_type=x86_64' > work/device_type 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo install -m 0444 work/device_type work/rootfs/data/mender/ 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo echo 'artifact_name=u20' > work/rootfs/etc/mender/artifact_info 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo mkdir -p work/rootfs//boot/efi 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Running: sudo rsync --archive --keep-dirlinks --verbose ./rootfs_overlay_demo/ work/rootfs/ 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] Run result: 2020-10-01 14:16:48 [DEBUG] [mender-convert-modify] sending incremental file list ./ .gitkeep etc/ etc/mender/ etc/mender/mender.conf sent 1,100 bytes received 73 bytes 2,346.00 bytes/sec total size is 846 speedup is 0.72 2020-10-01 14:17:06 [DEBUG] [mender-convert-package] Running: dd if=/dev/zero of=work/data.img seek=262144 count=0 bs=512 status=none 2020-10-01 14:17:06 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:06 [DEBUG] [mender-convert-package] 2020-10-01 14:17:06 [DEBUG] [mender-convert-package] Running: /sbin/mkfs.ext4 -q -F work/data.img 2020-10-01 14:17:06 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:07 [DEBUG] [mender-convert-package] 2020-10-01 14:17:07 [DEBUG] [mender-convert-package] Running: mkdir -p work/output 2020-10-01 14:17:07 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:07 [DEBUG] [mender-convert-package] 2020-10-01 14:17:07 [DEBUG] [mender-convert-package] Running: sudo mount work/data.img work/output 2020-10-01 14:17:07 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Running: sudo rsync --archive --delete work/rootfs/data/ work/output/ 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Running: sudo umount work/output 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Running: dd if=/dev/zero of=work/rootfs.img seek=7125660 count=0 bs=512 status=none 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Running: /sbin/mkfs.ext4 -q -F work/rootfs.img 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Running: mkdir -p work/output 2020-10-01 14:17:08 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:09 [DEBUG] [mender-convert-package] 2020-10-01 14:17:09 [DEBUG] [mender-convert-package] Running: sudo mount work/rootfs.img work/output 2020-10-01 14:17:09 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:17:09 [DEBUG] [mender-convert-package] 2020-10-01 14:17:09 [DEBUG] [mender-convert-package] Running: sudo rsync --archive --delete work/rootfs/ work/output/ 2020-10-01 14:17:09 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:21:10 [DEBUG] [mender-convert-package] 2020-10-01 14:21:10 [DEBUG] [mender-convert-package] Running: sudo umount work/output 2020-10-01 14:21:10 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:21:12 [DEBUG] [mender-convert-package] 2020-10-01 14:21:12 [DEBUG] [mender-convert-package] Running: cp --sparse=always work/rootfs.img deploy/cl200_u20-x86_64-mender.ext4 2020-10-01 14:21:12 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:24:08 [DEBUG] [mender-convert-package] 2020-10-01 14:24:08 [DEBUG] [mender-convert-package] Running: mender-artifact --compression gzip write rootfs-image --file work/rootfs.img --output-path deploy/cl200_u20-x86_64-mender.mender --artifact-name u20 --device-type x86_64 2020-10-01 14:24:08 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:29:13 [DEBUG] [mender-convert-package] 2020-10-01 14:29:13 [DEBUG] [mender-convert-package] Running: dd if=/dev/zero of=deploy/cl200_u20-x86_64-mender.img bs=512 count=0 seek=32768000 status=none 2020-10-01 14:29:13 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:29:13 [DEBUG] [mender-convert-package] 2020-10-01 14:29:13 [DEBUG] [mender-convert-package] Running: /sbin/parted -s deploy/cl200_u20-x86_64-mender.img mklabel gpt 2020-10-01 14:29:13 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Running: /sbin/parted -s deploy/cl200_u20-x86_64-mender.img unit s mkpart ESP fat32 16384 1064959 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Running: /sbin/parted -s deploy/cl200_u20-x86_64-mender.img set 1 boot on 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Running: /sbin/parted -s deploy/cl200_u20-x86_64-mender.img -- unit s mkpart primary ext2 1064960 16760831 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Running: /sbin/parted -s deploy/cl200_u20-x86_64-mender.img -- unit s mkpart primary ext2 16760832 32456703 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Running: /sbin/parted -s deploy/cl200_u20-x86_64-mender.img -- unit s mkpart primary ext2 32456704 32718847 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Running: /sbin/parted -s deploy/cl200_u20-x86_64-mender.img print 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Model: (file) Disk /mender-convert/deploy/cl200_u20-x86_64-mender.img: 16.8GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 8389kB 545MB 537MB fat32 ESP boot, esp 2 545MB 8582MB 8036MB ext4 primary 3 8582MB 16.6GB 8036MB ext4 primary 4 16.6GB 16.8GB 134MB ext4 primary 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Running: dd if=work/part-1.fs of=deploy/cl200_u20-x86_64-mender.img seek=16384 conv=sparse,notrunc status=none 2020-10-01 14:29:14 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:30:56 [DEBUG] [mender-convert-package] 2020-10-01 14:30:56 [DEBUG] [mender-convert-package] Running: dd if=work/rootfs.img of=deploy/cl200_u20-x86_64-mender.img seek=1064960 conv=sparse,notrunc status=none 2020-10-01 14:30:56 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:40:17 [DEBUG] [mender-convert-package] 2020-10-01 14:40:17 [DEBUG] [mender-convert-package] Running: dd if=work/rootfs.img of=deploy/cl200_u20-x86_64-mender.img seek=16760832 conv=sparse,notrunc status=none 2020-10-01 14:40:17 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:49:46 [DEBUG] [mender-convert-package] 2020-10-01 14:49:46 [DEBUG] [mender-convert-package] Running: dd if=work/data.img of=deploy/cl200_u20-x86_64-mender.img seek=32456704 conv=sparse,notrunc status=none 2020-10-01 14:49:46 [DEBUG] [mender-convert-package] Run result: 2020-10-01 14:49:47 [DEBUG] [mender-convert-package] 2020-10-01 14:49:47 [DEBUG] [mender-convert-package] Running: pigz --best --force deploy/cl200_u20-x86_64-mender.img 2020-10-01 14:49:47 [DEBUG] [mender-convert-package] Run result: ``` ---
**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\ **Post date:** [October 1, 2020, 3:38pm UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/25 "2020-10-01T15:38:40Z")
> [@mikhailtchernychev](#): > > ```auto > 2020-10-01 14:16:47 [INFO] [mender-convert-modify] Found initramfs image: > > work/rootfs/boot/initrd.img-5.4.0-48-generic > work/rootfs/boot/initrd.img.old > work/rootfs/boot/initrd.img > > basename: extra operand 'work/rootfs/boot/initrd.img' > Try 'basename --help' for more information. > > ``` @mirzak any idea why this is failing? I’ll take a look about convert of Ubuntu 20.04 to see if I can fix an issue. Thanks for report. ---
**Author:** ![mikhailtchernychev](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mikhailtchernychev/32/1023_2.png) [@mikhailtchernychev](https://hub.mender.io/u/mikhailtchernychev)\ **Post date:** [October 1, 2020, 3:48pm UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/26 "2020-10-01T15:48:37Z")
Seem “basename” is inside the container so it is correct version. Why actual kernel images are used instead of symlinks? ---
**Author:** ![mikhailtchernychev](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mikhailtchernychev/32/1023_2.png) [@mikhailtchernychev](https://hub.mender.io/u/mikhailtchernychev)\ **Post date:** [October 1, 2020, 3:49pm UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/27 "2020-10-01T15:49:54Z")
If you need original image to try I can upload it somewhere or send via “wetransfer” ---
**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\ **Post date:** [October 1, 2020, 6:01pm UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/28 "2020-10-01T18:01:44Z")
Would be perfect. When uploaded push link here. I can check tomorrow. Thanks a lot. ---
**Author:** ![mikhailtchernychev](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mikhailtchernychev/32/1023_2.png) [@mikhailtchernychev](https://hub.mender.io/u/mikhailtchernychev)\ **Post date:** [October 1, 2020, 8:21pm UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/29 "2020-10-01T20:21:54Z")
You can download file here [https://altairengineering-my.sharepoint.com/:u:/g/personal/mtchernychev\_altair\_com/EcFQS-V0yCJFnpJGTmhkr2kB\_tgS1IHG7h61rIsLh7w3Zg?e=fJdnB8](https://altairengineering-my.sharepoint.com/:u:/g/personal/mtchernychev_altair_com/EcFQS-V0yCJFnpJGTmhkr2kB_tgS1IHG7h61rIsLh7w3Zg?e=fJdnB8) It is compressed image cl200\_u20.img.gz with two partitions. The config file I used is here > **[OneDrive for Business](https://altairengineering-my.sharepoint.com/personal/mtchernychev_altair_com/_layouts/15/onedrive.aspx?id=%2Fpersonal%2Fmtchernychev%5Faltair%5Fcom%2FDocuments%2Fmender%2Fcl200%5Fx86%2D64%5Fhdd%5Fconfig&parent=%2Fpersonal%2Fmtchernychev%5Faltair%5Fcom%2FDocuments%2Fmender&originalPath=aHR0cHM6Ly9hbHRhaXJlbmdpbmVlcmluZy1teS5zaGFyZXBvaW50LmNvbS86dTovZy9wZXJzb25hbC9tdGNoZXJueWNoZXZfYWx0YWlyX2NvbS9FZm5GaFhCNWR2dElqdHhHYkdyUFI2Z0JpR2N0WER3aUJvSEFCWmx1MGdEVXhBP3J0aW1lPUg0b0JaRWhtMkVn)** cl200\_x86-64\_hdd\_config BTW how your forked version of mender-convert related to the main repo? Is it going to be merged some day? Thank you for looking into this Mikhail ---
**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\ **Post date:** [October 2, 2020, 7:56am UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/30 "2020-10-02T07:56:29Z")
I converted image and I didn’t see any issue with mender-convert (I’m using latest master + this one commit on top). But board doesn’t boot. It mount rootfs properly -\> seems to be btrfs but then it cannot find init which is strange because /root is mounted. I’ll flash original image and try to check. ---
**Author:** ![mikhailtchernychev](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mikhailtchernychev/32/1023_2.png) [@mikhailtchernychev](https://hub.mender.io/u/mikhailtchernychev)\ **Post date:** [October 2, 2020, 2:35pm UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/31 "2020-10-02T14:35:13Z")
Are you using [https://github.com/nandra/mender-conversion-tools.git](https://github.com/nandra/mender-conversion-tools.git) or [https://github.com/mendersoftware/mender-convert.git](https://github.com/mendersoftware/mender-convert.git) with your patch on top? ---
**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\ **Post date:** [October 2, 2020, 6:55pm UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/32 "2020-10-02T18:55:11Z")
Official mender repo (not my fork). What puzzles me is why it cannot boot properly after conversion. This needs to be checked. ---
**Author:** ![mikhailtchernychev](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mikhailtchernychev/32/1023_2.png) [@mikhailtchernychev](https://hub.mender.io/u/mikhailtchernychev)\ **Post date:** [October 3, 2020, 4:55am UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/33 "2020-10-03T04:55:51Z")
Ok, it finally worked for both fresh installs ubuntu server 18 and 20! I used mender-convert master and picked by hand your changes in mender-convert-modify and modules/probe.sh from here [https://github.com/nandra/mender-conversion-tools/commit/0f500f215a9c944c85df731b2e499c6e111a5cc8](https://github.com/nandra/mender-conversion-tools/commit/0f500f215a9c944c85df731b2e499c6e111a5cc8) There is also could be a small issue because CL200 has two options to boot from internal MMC memory, but one or both appeared to work. I think the most important thing is your patch which uses correct grub.cfg and it should be merged into mender master. Thank you very much! Mikhail ---
**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\ **Post date:** [October 5, 2020, 6:48am UTC](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490/34 "2020-10-05T06:48:15Z")
Thanks a lot for replying back. [Previous page](https://hub.mender.io/t/cl200-series-x86-64-mender-convertion/2490.md?page=1)