# Boot device not found after integration mender into yocto

**URL:** https://hub.mender.io/t/boot-device-not-found-after-integration-mender-into-yocto/967
**Category:** General Discussions
**Tags:** yocto, intel, thud
**Created:** [August 27, 2019, 3:28pm UTC](https://hub.mender.io/t/boot-device-not-found-after-integration-mender-into-yocto/967 "2019-08-27T15:28:43Z")
**Posts on this page:** 1
**Showing post:** 6

<div class="post-metadata">

### Author: ![drewmoseley](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/drewmoseley/32/47_2.png) [@drewmoseley](https://hub.mender.io/u/drewmoseley)
#### Post date: [August 28, 2019, 5:17pm UTC](https://hub.mender.io/t/boot-device-not-found-after-integration-mender-into-yocto/967/6 "2019-08-28T17:17:08Z")

</div>

To clarify, this _is_ the HDDIMG which has the initramfs based installer. The installer script has been replaced with a Mender-specific one. Basically, the Mender version of the HDDIMG includes the UEFIIMG and then just uses “dd” to write it. If MENDER\_STORAGE\_DEVICE is set, it will attempt to use that. Otherwise, if mender-partuuid is set, it will scan for appropriate devices.

That said, prior to the PR mentioned, the HDDIMG file would not work. Now “install” is the only boot option and it does work.

---

_[View the full topic](https://hub.mender.io/t/boot-device-not-found-after-integration-mender-into-yocto/967)._