# Best way to setup Mender on multiple devices

**URL:** <https://hub.mender.io/t/best-way-to-setup-mender-on-multiple-devices/2961>\
**Category:** General Discussions\
**Tags:** raspberry-pi-4\
**Created:** [December 9, 2020, 1:27pm UTC](https://hub.mender.io/t/best-way-to-setup-mender-on-multiple-devices/2961 "2020-12-09T13:27:21Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![mirzak](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/mirzak/32/2056_2.png) [@mirzak](https://hub.mender.io/u/mirzak)\
**Post date:** [December 9, 2020, 2:38pm UTC](https://hub.mender.io/t/best-way-to-setup-mender-on-multiple-devices/2961/6 "2020-12-09T14:38:34Z")

</div>

Another approach would be to generate images based on the flow described here,

> [@Raspberry Pi 3 Model B/B+ Raspbian](https://hub.mender.io/t/raspberry-pi-3-model-b-b-raspbian/140):
>
> Board description The Raspberry Pi 3 Model B/B+ is a popular single board computer based on Broadcom SoCs. It is the most powerful board within the Raspberry Pi family and probably the most popular with “makers”. [770A5842-462x322] URL: [https://www.raspberrypi.org/products/raspberry-pi-3-model-b-plus](https://www.raspberrypi.org/products/raspberry-pi-3-model-b-plus?target=_blank) URL: [https://www.raspberrypi.org/products/raspberry-pi-3-model-b](https://www.raspberrypi.org/products/raspberry-pi-3-model-b?target=_blank) Wiki: [https://elinux.org/RPi\_Hub](https://elinux.org/RPi_Hub?target=_blank)Test results The Raspberry Pi OS releases in the table below have been tested by the Mender c…

This essentially means that you would have a golden image without Mender installed, run it trough mender-convert, and the output is an image with Mender installed etc. This method is also required if you would like to perform system updates.

---

_[View the full topic](https://hub.mender.io/t/best-way-to-setup-mender-on-multiple-devices/2961)._