# BeagleBone Black

**URL:** <https://hub.mender.io/t/beaglebone-black/83>\
**Category:** Yocto Project\
**Tags:** yocto, beaglebone-black, sumo, thud, warrior, zeus\
**Created:** [October 9, 2018, 12:41pm UTC](https://hub.mender.io/t/beaglebone-black/83 "2018-10-09T12:41:44Z")\
**Posts on this page:** 1\
**Showing post:** 22

<div class="post-metadata">

**Author:** ![pdp7](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/pdp7/32/1293_2.png) [@pdp7](https://hub.mender.io/u/pdp7)\
**Post date:** [August 8, 2021, 6:52pm UTC](https://hub.mender.io/t/beaglebone-black/83/22 "2021-08-08T18:52:32Z")

</div>

Has anyone attempted to use Grub with the BeagleBone?

[Mender docs state](https://docs.mender.io/system-updates-yocto-project/board-integration/bootloader-support):

> By default, Mender uses GRUB to boot, and this is the recommended bootloader to use, even on platforms that ordinarily use U-Boot. However, U-Boot can be used in cases where using GRUB is not possible or unsuccessful.

So I thought it might be a good idea to try to use Grub with Mender on the BeagleBone but I am trying to figure out how to get started with that.

---

_[View the full topic](https://hub.mender.io/t/beaglebone-black/83)._