# Application update in i.MX8M Mini

**URL:** https://hub.mender.io/t/application-update-in-i-mx8m-mini/2457
**Category:** General Discussions
**Created:** [September 17, 2020, 8:33am UTC](https://hub.mender.io/t/application-update-in-i-mx8m-mini/2457 "2020-09-17T08:33:16Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![Kunal](https://avatars.discourse-cdn.com/v4/letter/k/dec6dc/32.png) [@Kunal](https://hub.mender.io/u/Kunal)
#### Post date: [September 17, 2020, 2:30pm UTC](https://hub.mender.io/t/application-update-in-i-mx8m-mini/2457/3 "2020-09-17T14:30:29Z")

</div>

Hi @drewmoseley,

I have used this [link](https://docs.mender.io/artifact-creation/create-a-custom-update-module) to create a web-file type module. I have done the setup from this [link](https://hub.mender.io/t/nxp-i-mx-8m-mini-evaluation-kit/659). Do I explicitly need to install the update module after doing the yocto setup?

Below is the mender client version output in my imx8mmevk.  
"root@imx8mmevk:~# mender --version  
INFO[0000] Configuration file does not exist: /var/lib/mender/mender.conf module=config  
INFO[0000] Loaded configuration file: /etc/mender/mender.conf module=config  
INFO[0000] Mender running on partition: /dev/mmcblk1p3 module=main  
1.7.1  
runtime: go1.9.7  
"

Regards,  
Kunal

---

_[View the full topic](https://hub.mender.io/t/application-update-in-i-mx8m-mini/2457)._